Bedienungsanleitung DeLonghi Dinamica ECAM 350.35 (Seite 13 von 24) (Englisch)

687415

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

3. Press OK (B3) to conrm and select the required item with

the selection arrows. Then follow the instructions for each

setting.

• Set temperature:

To modify the temperature of the water used to make the coee,

proceed as follows:

4. Press OK (B3). The current value appears on the display

(B1) and the "New" value ashes;

5. Select the new value you want to set using the selection

arrows (B2 or B4);

6. When the required value (low, medium, high, maximum)

has been selected, press OK.

The display goes back to the previous screen.

• Water hardness:

For instructions on identifying and setting water hardness, see

section “15. Setting water hardness”.

• Auto-o (standby):

Auto-o can be set so that the appliance goes o after 15 or 30

minutes, or 1, 2 or 3 hours

4. Press OK. The current value appears on the display (B1) and

the "New" value ashes;

5. Select the new value you want to set using the selection

arrows (B2 or B4);

6. When the required time has been selected, press OK.

The display goes back to the previous screen.

• Energy saving:

Use this function to enable or disable energy saving. When en-

abled, the function reduces energy consumption in compliance

with European regulations.

To disable or enable "Energy Saving", proceed as follows:

4. Press OK. The current state ("Enabled" or "Disabled") and

the operation to be performed ("Disable?" or "Enable?") is

displayed. Press OK to conrm;

5. Press OK to disable or enable the function.

The display goes back to the previous screen.

Please note!

• when the function is enabled, the "ECO" symbol appears

on the display.

• When in energy saving mode, a few seconds elapse before

the rst coee, cappuccino or milk-based coee is deliv-

ered as the appliance must heat up again.

• Beep:

Use this function to enable or disable the beep. Proceed as

follows:

4. Press OK. The current state ("Enabled" or "Disabled") and

the operation to be performed ("Disable?" or "Enable?") is

displayed. Press OK to conrm;

5. Press OK to disable or enable the function.

The display goes back to the previous screen.

• Default beverages:

Use this function to reset the default values for all the beverag-

es, or the individual beverages programmed previously. Select

the beverage, then proceed as follows:

4. Select "All" to reset the aroma and quantity settings to the

default values, or select the required beverage, then press

OK;

5. "Reset?": to reset the default values, press OK.

6. "Reset complete": the appliance conrms the reset and

goes back to the previous screen.

To reset another beverage, repeat from point 4 or to exit, press

/ESC (B5).

• Default values:

Use this function to reset all the appliance and beverage set-

tings (apart from the language which remains as selected the

rst time the appliance was used). Select the item, then proceed

as follows:

4. "Reset?"; press OK;

5. "Reset complete": the appliance conrms the reset and

goes back to the previous screen.

To exit, press /ESC (B5).

8.7 Statistics

This displays statistics relating to the machine. To display the

statistics, proceed as follows:

1. Press (B5) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Statistics" is

displayed between the two dotted lines;

3. Press OK (B3): statistics on the appliance are displayed, use

the selection arrows to scroll through the items;

4. Then press /ESC (B5) to exit.

To go back to the main screen, press /ESC.

9. MAKING COFFEE

9.1 Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and

should not require regulating initially.

However, if after making the rst few coees you nd that the

coee is either too weak and not creamy enough or delivery is

too slow (a drop at a time), this can be corrected by calibrating

the coee grinding using the adjustment dial (A5) (g. 6).

Please note:

The grinding adjustment dial must only be turned when the

coee mill is in operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Dinamica ECAM 350.35 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Dinamica ECAM 350.35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info