Bedienungsanleitung DeLonghi Dinamica ECAM 350.55 (Seite 13 von 21) (Englisch)

687413

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

6. To descale the appliance later, press ESC (B5). The symbol

on the display reminds you that the appliance needs descaling.

To access the descaling menu:

1. Turn the appliance on and wait until it is ready for use;

2. Press (B6) to enter the "Settings" menu;

3. Press the selection arrows (B2 and B4) until "Maintenance"

is displayed between the two lines. Press OK (B3);

4. Press OK to select "Descale";

5. Conrm? (∼45 minutes)”. Press OK to conrm;

6. "Remove lter": extract the water tank (A17), remove the

water softener lter (C4) (if present) and empty the water

tank. Press OK;

7. "Pour descaler and water into tank": Pour the descaler into

the tank up to level A (corresponding to a 100 ml pack)

marked on the inner surface of the tank, then add water

(1 litre) up to level B (g. 32) and put the water tank back.

Press OK;

8. "Empty drip tray": Remove, empty and replace the drip

tray (A15) and grounds container (A11). Press OK;

"Place 1.8L container empty under spouts": Place an empty

container with a minimum capacity of 1.8 litres under the hot

water spout (C6) and coee spouts (A9) (g. 33). Press OK

;

1,8 l

Important! Danger

of burns

Hot water containing acid

ows out of the coee spouts

and hot water spout. Take

care to avoid contact with

splashes of this solution.

10.

"Descaling underway":

The descale programme

starts and the descaler liq-

uid comes out of the hot

water and coee spouts. A series of rinses and pauses is

performed automatically to remove all the scale residues

inside the coee machine;

After about 25 minutes, descaling stops;

11. "Rinse tank and ll with water": the appliance is now

ready to rinse with fresh water. Empty the container used

to collect the descaler solution. Extract the water tank,

empty, rinse under running water, ll with fresh water up

to the MAX level and put back in the appliance. Press OK;

12. "Place 1.8L container empty under spouts": place the con-

tainer used to collect the descaler solution empty under

the coee spouts and hot water spout (g. 33) and press

OK";

13. "Rinsing Conrm?": press OK;

6. Use the brush (C5) to remove any coee residues left in the

infuser housing, visible through the infuser door;

7. After cleaning, replace the infuser by sliding it onto the in-

ternal support, then push the PUSH symbol fully in until it

clicks into place;

Please note:

If the infuser is dicult to insert, before insertion, adapt it to the

right size by pressing the two levers (g. 27).

8. Once inserted, make sure the two coloured buttons have

snapped out;

9. Close the infuser door;

10. Put the water tank back.

14.10 Cleaning the milk container

Clean the milk container (D) each time you prepare milk as de-

scribed below:

1. Remove the lid (D2);

2. Remove the milk spout (D5) and intake tube (D4) (g. 28);

3. Turn the froth adjustment dial (D1) anticlockwise to the

"INSERT" position (g. 29) and pull o upwards;

4. Wash all the components thoroughly with hot water and

mild washing-up liquid. All components are dishwasher

safe, placing them in the top basket of the dishwasher.

Make sure there are no milk residues on the hollow and

groove under the dial (g. 30). If necessary, scrape the

groove with a toothpick;

5. Rinse inside the froth adjustment dial seat with running

water (g. 31);

6. Check that the intake tube and milk spout are not clogged

with milk residues;

7. Replace the dial (in correspondence to the word "INSERT"),

spout and milk intake tube;

8. Place the lid back on the milk container (D3).

14.11 Cleaning the hot water nozzle

Each time you prepare milk, clean the connection nozzle (A8)

with a sponge to remove milk residues from the gaskets (g.

20).

15. DESCALING

Important!

• Before use, read the instructions and the labelling on the

descaler pack.

• You should use De’Longhi descaler only. Using unsuitable

descaler and/or performing descaling incorrectly may re-

sult in faults not covered by the manufacturer's guarantee.

Descale the machine when "Descale, ESC to cancel, OK to des-

cale (∼45 minutes)" appears on the display (B1). To descale im-

mediately, press OK (B3) and follow the instructions from point

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Dinamica ECAM 350.55 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Dinamica ECAM 350.55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info