Bedienungsanleitung DeLonghi Dinamica ECAM 350.55 (Seite 14 von 21) (Englisch)

687413

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

11. "Rinsing underway": hot water is delivered rst from the

coee spouts, then from the hot water spout;

12. When the water in the tank has run out, empty the con-

tainer used to collect the rinsing water;

13. "Rinse tank and ll with water": extract the water tank and

ll with fresh water up to the MAX level. Press OK;

14. "Insert lter": put the water softener lter (if removed)

back in its housing in the water tank, and replace the tank

in the appliance. Press OK;

15. "Place 1.8L container empty under spouts":

place the con-

tainer used to collect the descaler solution empty under

the hot water spout. Press OK;

16. "Rinsing Conrm?": press OK.

17. "Rinsing underway".

Hot water comes out of the hot water

spout;

18. "Empty drip tray": At the end of the second rinse, remove,

empty and replace the drip tray (A15) and grounds con-

tainer (A11). Press OK;

19. "Descale complete": press OK;

20. "Fill tank": empty the container used to collect the rinse

water, remove the water tank and ll with fresh water up

to the MAX level, then put back in the appliance.

Descaling is complete.

Please note!

• If the descaling cycle is not completed correctly (e.g. no

electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container

(A11) to contain water;

• If the water tank has not been lled to the MAX level, at

the end of descaling, the appliance requests a third rinse to

guarantee that the descaler solution has been completely

eliminated from the machine's internal circuits.

• The appliance may request descaling cycles at very short

intervals. This is normal and due to the appliance’s ad-

vanced control system.

16. SETTING WATER HARDNESS

The descale message is displayed after a period of time estab-

lished according to water hardness.

The machine is set by default for a hardness level of 4. The ma-

chine can also be programmed according to the hardness of the

mains water in the various regions so that the machine needs to

be descaled less often.

16.1 Measuring water hardness

1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1)

from its pack (attached to the English instructions);

2. Immerse the paper completely in a glass of water for one

second;

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

one level;

16.2 Setting water hardness

1. Press (B6) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "General" is

displayed between the two lines. Press OK;

3. Press the selection arrows until "Water hardness" is dis-

played, then press OK;

4. The current selection appears on the display and the new

selection ashes. Press the selection arrows until the re-

quired new selection is displayed. Press OK.

The new level is saved and the appliance goes back to the "Gen-

eral" menu.

Press /ESC (B5) twice to go back to the main screen.

17. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C4). If this

is not the case with your model, you are recommended to pur-

chase one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

17.1 Installing the lter

1. Remove the lter (C4)

from the packaging. The

date indicator disk varies

according to the lter

provided.

2. Turn the date indicator

disk (g. 34) until the

next 2 months of use are

displayed.

Please note

The lter lasts about two

months if the appliance is

used normally.

soft water (level 1)

hard water (level 3)

very hard water (level 4)

slightly hard water (level 2)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Dinamica ECAM 350.55 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Dinamica ECAM 350.55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info