Bedienungsanleitung DeLonghi ECAM 650.75 - Prima Donna Elite (Seite 17 von 31) (Englisch)

648643

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

”

Please note!

• If the hot chocolate powder used does not contain thicken-

er, adjusting the density will have no eect.

• To stop making chocolate, press “

STOP”.

Once the chocolate has been made, the appliance prepares to

make the next drink. The chocolate is ready to be poured into

the cup.

Danger of burns!

• While making the chocolate, the carafe and lid become

very hot. Hold by the handle only to remove the carafe and

pour the chocolate.

• While making the hot chocolate, it is normal for steam to

come out of the holes in the chocolate carafe lid.

• Heating the milk causes splashes inside the carafe. This is

normal.

• The quantity of hot chocolate in the cup varies according to

the density selected. The quantity is less with a high densi-

ty than with a low density.

12. DELIVERING HOT WATER

Important! Danger of burns.

Do not leave the appliance unattended while hot water is being

delivered.

1. Make sure the hot water/steam spout (C6) is attached cor-

rectly to the hot water/steam connection nozzle (A9);

2. Place a container under the spout (as close as possible to

avoid splashes);

3. Press “

HOT WATER”. The corresponding image ap-

pears on the display (B), together with a progress bar

which lls gradually as preparation proceeds;

4. The machine delivers about 250 ml of hot water, then

delivery stops automatically. To interrupt delivery of hot

water manually, press “ STOP” .

Please note!

• If “Energy Saving” mode is active, you may have to wait a

few seconds before the hot water is delivered.

• Preparation of hot water can be customised (see sections

“14. Customising the drinks” and “15. Memorising your

personal prole”).

13. STEAM DELIVERY

Important! Danger of burns.

Do not leave the appliance unattended while steam is being

delivered.

1. Make sure the hot water/steam spout (C6) is attached cor-

rectly to the hot water/steam connection nozzle (A9);

2. Fill a container with the liquid to be heated or frothed and

immerse the hot water/steam spout in the liquid;

3. Press “ STEAM”. The corresponding image appears

on the display (B), together with a progress bar which lls

gradually as preparation proceeds and after a few seconds,

steam to heat the liquid is delivered from the hot water/

steam spout;

4. When the required temperature or level of froth is ob-

tained, interrupt steam delivery by pressing “ STOP”.

(You should not deliver steam for more than 3 minutes at a

time);

Important!

Always stop steam delivery before extracting the container con-

taining the liquid to avoid burns from splashes.

Please note!

If “Energy Saving” mode is active, you may have to wait a few

seconds before the hot water is delivered.

13.1 Tips for using steam to froth milk

• When choosing the size of the container, bear in mind that

the liquid doubles or triples in volume.

• For a richer denser froth, use skimmed or partially skimmed

milk at refrigerator temperature (about 5°C).

• For a creamier froth, rotate the container with slow move-

ments in an upward direction.

• To avoid milk with poor froth or large bubbles, always clean

the spout (C6) as described in the following section.

13.2 Clean the hot water/steam spout after use

Always clean the hot water/steam spout (C6) after use to avoid

the build-up of milk residues and prevent it from clogging.

1. Place a container under the hot water/steam spout and de-

liver a little water (see section “12. Delivering hot water”).

Stop delivery of hot water by pressing “ STOP”.

2. Wait a few minutes for the hot water/steam spout to cool

down, then extract (g. 17) by pressing the release button

(C7). Hold the spout with one hand and with the other,

turn the hot water/steam spout and pull it downwards

(g. 31).

3. Also remove the steam connection nozzle by pulling it

downwards (g. 32).

4. Check the hole in the connection nozzle is not blocked. If

necessary, clean using a toothpick.

5. Wash all parts of the spout thoroughly with a sponge and

warm water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM 650.75 - Prima Donna Elite Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM 650.75 - Prima Donna Elite

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info