Bedienungsanleitung DeLonghi ECAM350.50 - Dinamica (Seite 7 von 24) (Englisch)

769999

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

The machine proceeds to run a rinse cycle; besides heating the

boiler, this serves to circulate hot water around the internal cir-

cuits so that they are warmed up as well.

Once the heating cycle has ended, the coee beverage and

OK icons become active and light up; if the milk container (D3)

is in position, the icons indicating the milk beverages will also

be active.

5. TURNING THE APPLIANCE OFF

Whenever the machine is turned o after being used to make

coee, it performs an automatic rinse cycle.

Danger of scalding!

During rinsing, a little hot water ows from the coee spouts

(A9). Take care to avoid contact with splashes of water.

• To turn the appliance o, press the button (A7) (g.

6);

• If provided for, the appliance performs a rinse cycle then

goes o (stand-by).

Please note:

If you will not be using the appliance for some time, unplug it

from the mains socket:

• rst turn the appliance o by pressing the button

(g. 6);

6. SETTING WATER HARDNESS

For instructions on setting water hardness, see section “18. Set-

ting water hardness”.

7. SETTING TEMPERATURE

To change the temperature of the water used for making coee

(low, medium, high), proceed as follows:

1. With the machine o (in standby mode) but still plugged

into the electrical power supply;

2. Press and hold the icon (B9) until the indicators on the

touch screen (B) light up;

3. Press the icon (B10);

4. Press the icon again to select the desired temperature :

low

medium

high

5. Press the OK icon (B15) to conrm (or ESC (B14)

to exit without making any change).

The lights go o.

The appliance returns to "standby" and the temperature is now

programmed.

8. AUTOOFF

THE time can be changed so that the appliance switches o after

being idle for 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-o, proceed as follows:

1. With the machine o (in standby mode) but still plugged

into the electrical power supply;

2. Press and hold the icon (B9) until the icons on the touch

screen (B) light up;

3. Press the icon (B11);

4. Press the icon again to select the desired time

interval:

15 min.

30 min.

1 hour

2 hours

3 hours

5. Press the OK icon (B15) to conrm (or ESC (B14)

to exit without making any change). The lights go o.

The auto-o time is now programmed.,

9. ENERGY SAVING

Use this function to enable or disable energy saving. This mode

is active by default, reducing energy consumption while the ma-

chine is on in compliance with current European regulations. To

change the setting, proceed as follows:

1. With the machine o (in standby mode) but still plugged

into the electrical power supply;

2. Press and hold the icon (B9) until the indicators on the

touch screen (B) light up.

3. Press the icon (B13);

4. Press the icon again to enable/disable the function:

• function enabled

• function disabled

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM350.50 - Dinamica Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM350.50 - Dinamica

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info