Bedienungsanleitung DeLonghi ECAM350.50 - Dinamica (Seite 16 von 24) (Englisch)

769999

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

10. When the water in the tank has run out, empty the con-

tainer used to collect the rinsing water;

11. Take out the water tank and ll with fresh water up to the

MAX level.

12. If the water softener lter was removed, replace it in its

housing in the water tank, and reposition the tank in the

appliance;

13. Empty

the container used to collect the descaler solution,

then position it under the hot water spout.

14. Press

OK (B15)

15. Hot water comes out of the hot water spout;

16. At the end of the second rinse, remove, empty and replace

the drip tray (A15) and grounds container (A11).

17. Empty the container used to collect the rinse water; re-

move the water tank from the machine, empty it and rinse

under running water, then ll with clean water up to the

MAX level and reposition it in the machine.

The descaling cycle is now complete.

Please note!

• If the descaling cycle is not completed correctly (e.g. power

failure or disconnection from power supply), the machine

will prompt it to be completed when switched on again.

• WATER may nd its way into the grounds container (A11)

during the descaling cycle: this is quite normal;

• If the water tank has not been lled to the MAX level, at

the end of descaling, the appliance requests a third rinse to

guarantee that the descaler solution has been completely

eliminated from the machine's internal circuits.

• The appliance may request descaling cycles at very short

intervals. This is normal and due to the appliance’s ad-

vanced control system.

• THE descaling procedure can also be started by pressing

and holding the icon (B8).

18. SETTING WATER HARDNESS

The descaling alert is displayed after a period of time estab-

lished according to water hardness.

The machine is set by default for a hardness level of 4. The ma-

chine can also be programmed according to the actual hardness

of the local water supply, so that the descaling procedure will be

required less frequently.

18.1 Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” reagent strip (C1)

from its pack;

2. Immerse the strip completely in a glass of water for about

one second;

3. Remove the strip from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares will appear, de-

4. Place an empty container with a minimum capacity of 1.8

litres under the hot water spout (C6) and coee spouts (A9)

(g. 34); Press OK (B15);

1,8 l

Important! Danger of scalding

Hot water containing acid ows out of the coee spouts and

hot water spout. Take care to avoid contact with splashes of this

solution.

5. The descale programme starts and the descaler liquid

comes out of the hot water and coee spouts. A series of

rinses is performed automatically to remove all the scale

residues inside the coee machine. This is the longest

phase and may account for more than half the total des-

caling time.

After completing the descaling cycle, the appliance is ready to

be rinsed through with clean water.

6. Empty the container used to collect the descaler solution.

Remove the water tank from the machine, empty it and

rinse under running water, then ll with clean water up

to the MAX level (g 35) and reposition it in the machine.

MAX

7. Empty the container used to collect the descaler solution,

then position it under the coee spout and the hot water

spout (g. 34);

8. Press OK (B15);

9. Hot water is delivered rst from the coee spouts, then

from the hot water spout;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM350.50 - Dinamica Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM350.50 - Dinamica

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info