Bedienungsanleitung DeLonghi ECAM450.76 Eletta Explore (Seite 18 von 32) (Englisch)

800467

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

rests on or the surrounding area. To remove the drip tray, pro-

ceed as follows:

1. Remove the drip tray and coee grounds container (A10)

(g. 28);

2. Check the red condensate tray (A12) and empty if full;

3. Remove the cup tray (A13) and drip tray grille (A14), then

empty the drip tray and grounds container and wash all

components;

4. Put the drip tray complete with grille and grounds contain-

er back in the appliance.

Important!

When removing the drip tray, the grounds container must be

emptied, even if it contains few grounds. If this is not done,

when you make the next coees, the grounds container will ll

up more than expected and clog the machine.

15.5 Cleaning the inside of the machine

Danger of electric shock!

Before cleaning internal parts, the machine must be turned o

(see section “5. Turning the appliance o”) and unplugged from

the mains power supply. Never immerse the machine in water.

1. Check regularly (about once a month) that the inside of the

appliance (accessible after removing the drip tray (A15))

is not dirty. If necessary, remove coee deposits with the

brush (D5) supplied and a sponge.

2. Remove all residues with a vacuum cleaner (g. 30).

15.6 Cleaning the water tank

Clean the water tank (A22) regularly, about once a month and

whenever you replace the water softener lter (D4).

1. Extract the water tank (g. 2), remove the water softener

lter (if present) and rinse with running water;

2. Empty the water tank and clean with a damp cloth and a

little washing up liquid. Rinse thoroughly with water;

3. Put the lter back in the appliance (g. 31), ll the tank

with fresh water up to the MAX level (g. 3) and put the

tank back;

4. (models with water softener lter only) Deliver 100ml of hot

water to reactivate the lter.

Please note:

If the appliance is not used for more than 3-4 days, you should

clean the tank as described above.

15.7 Cleaning the pre-ground coee funnel

Clean the pre-ground coee funnel (A4) regularly (about once a

month) with a damp cloth. Proceed as follows:

1. Turn the machine o (see chapter “5. Turning the appliance

o”;

2. Open the funnel ap;

3. Clean the funnel with the brush provided (D5);

4. Close the ap.

Important!

After cleaning, make sure there are no accessories left in the

funnel. The presence of foreign objects in the funnel while the

machine is in operation could damage the appliance.

15.8 Cleaning the brewing unit

The brewing unit (A6) must be cleaned at least once a month.

Important!

The brewing unit cannot be extracted while the machine is on.

1. Make sure the machine is correctly turned o (see section

“5. Turning the appliance o”);

2. Remove the water tank (A22) (g. 2);

3. Open the brewing unit ap (A5) (g. 32) on the right side

of the appliance;

32 33

PUSH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM450.76 Eletta Explore Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM450.76 Eletta Explore

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info