Bedienungsanleitung DeLonghi ECAM450.76 Eletta Explore (Seite 20 von 32) (Englisch)

800467

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

3938

7. Check that the intake tube and spout are not clogged with

milk residues;

8. Dry all the components with a clean dry cloth;

9. Reassemble all the lid components;

10. Attach the lid back on the milk carafe.

Please note:

Each week the appliance reminds you to clean the milk carafe

thoroughly and proposes the correct cleaning sequence again.

16. DESCALING U

Important!

• Before use, read the instructions and labelling on the des-

caler pack.

• Use De’Longhi descaler only. Using unsuitable descaler

and/or performing descaling incorrectly may result in

faults not covered by the manufacturer’s guarantee.

• Descaler could damage delicate surfaces. If the product is

accidentally spilt, dry immediately.

To descale

Descaler De’Longhi descaler

Container Recommended capacity: 2 l

Time ~50min

Descale the appliance when the corresponding message appears

on the homepage (C). To descale immediately, press “OK” and

follow the instructions from point (5).

To descale the appliance later, press “Cancel”. The symbol

(C4) appears on the homepage to remind you the appliance

needs descaling. (The message appears each time you turn the

appliance on).

To access the descaling menu:

1. Press the settings menu icon

(C3) on the homepage;

2. Scroll through the menu items until “Descaling” is

displayed;

3. Press “Start” to enter the guided descaling procedure;

4. Press “Start” to begin;

5. Insert the water spout (D6) (g. 5);

6. Remove and empty the drip tray (A15) and coee grounds

container (A10) (g. 10), then put both back in the appli-

ance and press “Next”;

7. Remove the water tank (A22), lift the lid (A21) and (if in-

serted) remove the lter (D4). Empty the tank completely.

8. Pour the descaler into the tank up to the level A marked inside

the tank (equal to one 100ml pack), then add water (one litre)

up to level B (g. 40). Put the water tank (with lid) back in the

appliance and press “Next”

;

4140

9. Place an empty 2 litre container under the spouts (g. 41).

Press “Next” to start descaling (“Back” to go back to the pre-

vious screen or “X” to exit the procedure, remembering to

remove the descaling solution from the tank)

Important! Danger of scalding

Hot water containing acid ows out of the spouts. Take care to

avoid contact with splashes of this solution.

10. IThe descale programme starts and the descaler liquid

comes out of the hot water and coee spouts. A series of

rinses is performed automatically to remove all the scale

residues inside the coee machine;

After about 40 minutes, the descaling action ceases;

11. The appliance is now ready to be rinsed through with clean

water. Empty the container used to collect the descaler

solution. Remove the water tank, empty, rinse under run-

ning water, ll with fresh water up to the MAX level and put

back in the appliance (g. 42). Press “Next”;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM450.76 Eletta Explore Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM450.76 Eletta Explore

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info