Bedienungsanleitung DeLonghi ESAM 5500 (Seite 10 von 26) (Englisch)

99881

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

PRELIMINARY CHECKS

Controls after transport

After removing the packaging, make sure the

product is complete and undamaged and that all

accessories are present.

Do not use the appliance if it is visibly damaged.

Contact the Customer Service Center if product

seems damaged in any way.

Installing the appliance

Important!

When you install the appliance, you should

respect the following safety warnings:

• The appliance gives off heat. Leave a free

space of at least 1 inch around the sides and

back of the appliance and at least 6 inches at

the top, otherwise the heat could be trapped

and damage the machine.

• Water penetrating the appliance could cause

damage. Do not place the appliance near taps

or sinks.

• The appliance could be damaged if the water

it contains freezes. Do not install the appli-

ance in a room where the temperature could

drop below freezing point.

• Arrange the power cable in such a way that it

cannot be damaged by sharp edges or contact

with hot surfaces (e.g. electric hot plates).

Connecting the appliance

Important!

Check that the mains power

supply voltage corresponds to the value indicated

on the rating plate on the bottom of the appliance.

Connect the appliance to an properly grounded

and correctly installed socket with a minimum

current rating of 10A only. If the power socket

does not match the plug on the appliance, have

the socket replaced with a suitable type by a qual-

ified professional.

Using the appliance for the first

time

NB!

• Coffee has been used to factory test the appli-

ance and it is therefore completely normal for

there to be traces of coffee in the mill. The

machine is, however, guaranteed to be new.

• You should customize water hardness as

soon as possible following the instructions in

the section "Setting water hardness" on page

19.

• Some models are fitted with a water softener

filter which reduces the build up of limescale

in the appliance. To install, see the instruc-

tions in the section "Installing the filter" on

page 12.

1. Plug appliance into electrical outlet.

You must first select the language (the languages

scroll through at intervals of about two seconds):

2. When English appears, press the but-

ton for three seconds (fig. 1). Once the lan-

guage has been saved, the message "English

Installed" is displayed.

Follow the instructions indicated by the appliance:

3. "FILL TANK!": remove the water tank, fill to the

MAX line with fresh water then replace in the

appliance (fig. 2).

4. "INSERT WATER SPOUT AND PRESS OK":

Check that the hot water spout is inserted on

the nozzle and place a container underneath

(fig. 3).

Press the button (fig. 1). "Please Wait..."

is displayed and the appliance begins to run

off hot water.

The appliance ends the first start up procedure,

then the message "Turning Off, Please Wait..." is

displayed and the appliance goes off.

The coffee maker is now ready for normal use.

NB!

When using the appliance for the first

time, you need to make 4 to 5 cups of coffee and

4 to 5 cappuccinos before the appliance starts to

give satisfactory results.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM 5500 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM 5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info