Bedienungsanleitung DeLonghi ESAM 5500 (Seite 12 von 26) (Englisch)

99881

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Descaling

1. Press the P button to enter the menu;

2. Turn the selection knob until "Descaling" is

displayed;

3. Press the button;

4. The message "Confirm?" is displayed.

5. Press the button to confirm (or the

button to cancel the operation);

6. Carry out descaling as described in the sec-

tion "Descaling" on page 19.

Setting the temperature

1. Press the P button to enter the menu;

2. Turn the selection knob until "Set

Temperature" is displayed;

3. Press the button;

4. Turn the selection knob until the required tem-

perature (high, medium, low) is displayed;

5. Press the button to confirm (or the

button to cancel the operation);

6. Press the button to exit the menu.

Auto-Off

1. Press the P button to enter the menu;

2. Turn the selection knob until "Auto-Off" is dis-

played;

3. Press the button;

4. Turn the selection knob until the required

number of hours of operation (1, 2 or 3) is

displayed;

5. Press the button to confirm (or the

button to cancel the operation);

6. Press the button to exit the menu.

Setting water hardness

1. Press the P button to enter the menu;

2. Turn the selection knob until "Water Hardness"

is displayed;

3. Press the button;

4. Turn the selection knob until the water hard-

ness measured using the indicator strip is dis-

played (see paragraph "Measuring water hard-

ness" - page 19);

5. Press the button to confirm (or the

button to cancel the operation);

6. Press the button to exit the menu.

Resetting factory default values

(reset)

This function resets the entire menu with the

default values (except the language, which

remains as set).

1. Press the P button to enter the menu;

2. Turn the selection knob until "Default Values"

is displayed;

3. Press the button;

4. The message "Confirm?" is displayed.

5. Press the button to confirm and exit

(or the button to cancel the opera-

tion);

Installing the filter

Certain models

are provided with a water

softener filter (alternatively it can be pur-

chased separately from an authorized

Customer Service Center).

To install the filter, proceed as follows:

1. Insert the filter in the water tank as

far as it will go (see figure

alongside).

When you install the filter, you

must notify the appliance of its

presence.

2. Press the P button to enter

the menu;

3. Turn the selection knob until "Install Filter" is

displayed;

4. Press the button;

5. The message "Confirm?" is displayed.

6. Press the button to confirm (an aster-

isk appears at the top right of the display);

7. Press the button to exit the menu.

Replacing the filter ("Reset water

filter")

When the red light comes on, the filter must

be replaced:

1. Extract the exhausted filter and replace with a

new one;

2. Press the P button to enter the menu;

3. Turn the selection knob until "Reset Water

Filter" is displayed;

4. Press the button;

5. The message "Confirm?" is now displayed.

6. Press the button to confirm (or the

button to cancel the operation);

7. Press the button to exit the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM 5500 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM 5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info