Bedienungsanleitung DeLonghi ESAM420.40 - Perfecta Evo (Seite 13 von 19) (Englisch)

770033

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

2 L

4140

8. Remove, empty and replace the drip tray (A22) and

grounds container (A23). Press ;

9. Place an empty container with a recommended capacity

of 2 litres under the hot water spout (E) and coee spouts

(A16) (g. 41). Press ;

Important! Danger of scalding

Hot water containing acid ows out of the coee spouts and

hot water spout. Take care to avoid contact with splashes of this

solution.

10. The descale programme starts and the descaler liquid

comes out of the hot water and coee spouts. A series of

rinses and pauses is performed automatically to remove all

the scale residues inside the coee machine;

After about 25 minutes, descaling stops;

11. The appliance is now ready for rinsing through with clean

water. Empty the container used to collect the descaler

solution. Extract the water tank, empty, rinse under run-

ning water, ll with fresh water up to the MAX level and

put back in the appliance. Press ;

12. Place the container used to collect the descaler solution

empty under the coee spouts and hot water spout (g.

41) and press ;

13. Conrm by pressing ;

14. Hot water is delivered rst from the coee spouts, then

from the hot water spout;

15. When the water in the tank has run out, empty the con-

tainer used to collect the rinsing water;

16. Extract the water tank and ll with fresh water up to the

MAX level. Press ;

17. (If the lter was installed) Put the water softener lter (if

previously removed) back in its housing in the water tank

(A13), and replace the tank in the appliance, then press

;

18. Place the container used to collect the descaler solution

empty under the hot water spout. Press ;

19. "Rinsing Conrm?": press ;

20. "Rinsing underway". Hot water comes out of the hot water

spout;

21. When descaling is complete, press ;

22. "Empty drip tray": At the end of the second rinse, remove,

empty and replace the drip tray (A22) and grounds con-

tainer (A23). Press ;

23. Empty the container used to collect the rinse water, re-

move the water tank and ll with fresh water up to the

MAX level, then put back in the appliance.

The descaling cycle is now complete.

Please note:

• If the descaling cycle is not completed correctly (e.g. no

electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container

(A23) to contain water;

• If the water tank has not been lled to the MAX level, at

the end of descaling, the appliance requests a third rinse to

guarantee that the descaler solution has been complete-

ly eliminated from the machine's internal circuits. Before

starting rinsing, remember to empty the drip tray.

14. SETTING WATER HARDNESS

The descaling request is displayed after a period of time estab-

lished according to water hardness.

The machine is set by default for a hardness level of 4. The ma-

chine can also be programmed according to the hardness of the

mains water in the various regions so that the machine needs to

be descaled less often.

14.1 Measuring water hardness

1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1)

from its pack (attached to the English instructions);

2. Immerse the paper completely in a glass of water for one

second;

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

1 level;

soft water (level 1)

hard water (level 3)

very hard water (level 4)

slightly hard water (level 2)

14.2 Setting water hardness

1. Press (B2) to enter the menu;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM420.40 - Perfecta Evo Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM420.40 - Perfecta Evo

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info