Bedienungsanleitung DeLonghi ESAM420.40 - Perfecta Evo (Seite 14 von 19) (Englisch)

770033

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

2. Press the scroll arrows (B3) or (B5) until

"General" is displayed;

3. Press (B4) to conrm;

4. Press the scroll arrows or until "Water hard-

ness" is displayed:

5. Press . The current value appears on the display (D6)

and the "New" value ashes;

6. Select the new value you want to set using the scroll ar-

rows or ;;

7. After selecting the quantity, press .

The display goes back to the previous screen.

Press twice to go back to the main screen.

15. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C4). If this

is not the case with your model, you are recommended to pur-

chase one from De’Longhi Customer Services. To use the lter

correctly, follow the instructions below.

15.1 Installing the lter

1. Remove the lter (C4) from the packaging. The date indica-

tor disk varies according to the lter provided.

2. Turn the date indicator disk (g. 42) until the next 2

months of use are displayed.

0,5 L

Please note

The lter lasts about two months if the appliance is used nor-

mally. If the coee maker is left unused with the lter installed,

it will last a maximum of three weeks.

3. To activate the lter, run tap water through the hole in the

lter as shown in g. 42 until water comes out of the open-

ings at the side for more than a minute;

4544

4. Extract the tank (A12)

from the appliance and

ll with water;

5. Insert the lter in the

water tank and immerse

it completely for about

ten seconds, sloping it

and pressing it lightly to

enable the air bubbles to

escape (g. 44);

6. Insert the lter in the

lter housing (A13) and

press fully home (g. 45);

7. Close the tank with the lid (A11) (g. 46), then replace the

tank in the machine;

8. When you install the lter you must notify the appliance

of its presence.

9. Press (B2) to enter the "Settings" menu;

10. Press the scroll arrows (B3) or (B5) until

"Maintenance" is displayed, then press (B4);

11. Press the scroll arrows until "Install lter" is displayed, then

press ;

12. Press to conrm;

13. Place an empty container with a minimum capacity of 500

ml under the hot water/steam spout (E), then press

to start delivery;

14. The appliance starts delivering water;

15. After the ow of hot water stops, the appliance automati-

cally reverts to ready for use again.

The lter is now active and you can use the coee machine.

15.2 Replacingthe lter

Replace the lter (C4) when requested by the appliance. To

replace immediately, press (B4) and follow the instruc-

tions from point 8. To replace the lter later, press (B2).

The symbol appears on the display to remind you that the

lter needs replacing.

To replace, proceed as follows:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ESAM420.40 - Perfecta Evo Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ESAM420.40 - Perfecta Evo

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info