Bedienungsanleitung DeLonghi Maestosa - EPAM960.55 (Seite 4 von 25) (Englisch)

821514

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Please note!

If you will not be using the appliance for some time, unplug

from the mains socket:

3. Release the main switch (A10) at the back of the appliance

(g. 2).

Important!

Never press the main switch while the appliance is on.

6. MENU SETTINGS

6.1 Rinsin

Use this function to deliver hot water from the coee spouts

(A15) and hot water/steam spout (E), if inserted, to clean and

heat the appliance’s internal circuit.

Place a container with a minimum capacity of 100ml under the

coee and hot water spouts (g. 8).

To enable the function, proceed as follows:

1. Press the settings menu (B7);

2. Select "Rinsing";

3. Press "OK" to start delivery: after a few seconds, hot water

is delivered rst from the coee spouts, then from the hot

water/steam spout (if inserted) to clean and heat the ap-

pliance’s internal circuit (g. 11);

4. To stop rinsing, press "Cancel" or wait for rinsing to stop

automatically.

Please note!

• If the appliance is not used for more than 3-4 days, when

you turn it on again, we strongly recommend performing

2-3 rinses before use;

• After cleaning, it is normal for the grounds container (A16)

to contain water.

6.2 Descaling

For instructions on descaling, see section “16. Descaling”.

6.3 Clean milk container

This function can be used to clean the milk container (D) before

putting it in the refrigerator. To clean, proceed as follows:

1. Attach the milk container to the connection nozzles (A9)

and push as far as it will go (g. 22). The machine emits a

beep (if the beep function is enabled);

2. Adjust the milk spout (D6) by turning it anticlockwise (g.

23);

3. Place a recipient under the milk spout (g. 25);

4. Press the settings menu (B7);

5. Select "Clean milk container";

6. Press "OK" to start cleaning (g. 26): hot water is delivered

from the milk spout and stops automatically when clean-

ing is complete.

7. Before extracting the milk container, place the milk spout

in the not-in-use position by turning clockwise.

Please note!

• Never extract the milk container by pulling the milk spout.

• To interrupt the cleaning cycle at any moment, press

"Stop";

• In some cases, to clean you must wait for the appliance to

heat up;

• The milk container can be kept in the refrigerator.

6.4 Adjust mill

The coee mill is set by default to prepare coee correctly and

should not require regulating initially.

However, if after making the rst few coees you nd that the

coee is either too weak and not creamy enough or delivery is

too slow (a drop at a time), they can be adjusted.

Proceed as follows:

1. Press the settings menu (B7);

2. Select "Adjust mill". A tutorial appears on the display (B1)

with suggestions on the grinding level; if you want to skip

this presentation, press "Skip" or "Next" to continue with

the tutorial;

3. Follow the previous instructions in the tutorial to select the

required grinding neness by pressing directly on one of

the selectable numbers in the highlighted interval;

4. Press "OK" to conrm the selection: "The result in the cup

will be perceived after about 5 deliveries";

5. Press "OK" to conrm and go back to the homepage (B)

with the new selection saved.

Please note!

• After carrying out the above procedure, we recommend

delivering at least 5 coees before adjusting again. If cof-

fee delivery is still not correct, repeat the procedure.

• You cannot adjust more than one grinding level at a time

unless at least two coee-based beverages have been

made.

• Press "Default" to reset the default values of the coee mill

(indicated by a star).

6.5 Water lter

For instructions on the lter (C6), see section “18. Water softener

lter .

6.6 Water hardness

For instructions on setting water hardness, see section “17. Set-

ting water hardness”.

6.7 General

1. Press the settings menu (B7);

2. Select "General";

Here you can enable or disable the following functions with a

simple touch:

- "Beep": when enabled, the appliance beeps whenever an

operation is performed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Maestosa - EPAM960.55 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Maestosa - EPAM960.55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info