Bedienungsanleitung DeLonghi Maestosa - EPAM960.55 (Seite 5 von 25) (Englisch)

821514

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

- "Cup lighting": This function enables or disables the cup

lights under the coee spouts (A15).

- "Energy saving": use this function to enable or disable en-

ergy saving. When enabled, the function reduces energy

consumption in compliance with European regulations.

When enabled, the symbol appears on the icon in the

settings menu (B6).

6.8 A

uto

-o

Auto-o can be set so that the appliance goes o after 15 or 30

minutes, or 1, 2 or 3 hours.

To programme Auto-o, proceed as follows:

1. Press the settings menu (B7);

2. Select "Auto-O";

3. Select the desired time interval (15 or 30 minutes, or 1, 2

or 3 hours).

4. Press "←" to save the new selection and go back to the

homepage (B).

6.9 Bluetooth

This function enables or disables the protection PIN to connect

to the appliance from a mobile device. Proceed as follows:

1. Press the settings menu (B7);

2. Select "Bluetooth";

3. Enable or disable PIN protection by pressing the cursor cor-

responding to "PIN protection".

4. Press "←" to save the new selection and go back to the

homepage (B).

Please note!

• The serial number of the appliance, visible in the "Blue-

tooth" function, enables it to be identied unambiguously

when an association is created between the coee ma-

chine and the App.

• The preset PIN is "0000". You are recommended to custom-

ise the PIN directly from the App.

6.10 Selecting the language

To modify the language of the display (B1), proceed as follows:

1. Press the settings menu (B7);

2. Select "Select language";

3. Press the ag corresponding to the language you want

to set (press "Next" or "Back" to display all the languages

available). The display is immediately updated with the

selected language.

4. Press "←" to save the new selection and go back to the

homepage (B).

6.11 Emptying the circuit

To avoid the water in the circuit freezing if the appliance is to be

left idle for a long period of time, or before taking it to customer

services, we recommend emptying the water circuit.

Proceed as follows:

1. Press the settings menu (B7);

2. Select "Empty water circuit";

3. Press "OK" to start the guided procedure;

4. Empty the grounds container (A16) and drip tray (A20),

then press "Next";

5. Position a 0.5 L container under the coee spouts (A15).

Press "OK";

6. The appliance performs a rinse cycle with hot water from

the spouts;

7. When the rinse cycle has ended, press the button (A13),

open the door (A14) (g. 3), extract the water tank (A23)

(g. 4), empty it, then press "Next";

8. If present, remove the water softener lter (C6) from the

water tank and press "Next";

9. Put the water tank (empty) back in the appliance, close the

front door and press "OK";

10. Wait for the appliance to empty the circuit; (Important:

hot water from the spouts!). As the water circuit empties,

the appliance could become noisier. This is part of normal

operation.

11. When the circuits are empty, open the front door, extract

and empty the drip tray, put back in the appliance and

press "Next";

12. Press "OK". The appliance goes o (standby).

The next time the appliance is turned on, follow the instructions

in section “3. Setting up the appliance ”.

6.12 Edit prole

You can use this function to modify the image and colour of the

icon for each prole. To customise the icon, proceed as follows:

1. Press the settings menu (B7);

2. Select "Edit prole";

3. Select the prole and press "Next";

4. Customise as you wish, then press "OK" to continue.

5. Press "←" to save the new selection and go back to the

homepage (B).

6.13 Default values

This resets all menu settings and user customisation back to

the default values (with the exception of the language, which

remain as set, and the statistics).

Proceed as follows:

1. Press the settings menu (B7);

2. Select "Default values";

3. To reset the appliance to the default values, press "OK"; other-

wise to reset the individual prole, press the arrow to pass to the

next screen, select the prole to reset and press "OK";

4. Press "OK" again to conrm the reset to default values;

5. Press "OK" to exit the menu and go back to the homepage

(B).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Maestosa - EPAM960.55 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Maestosa - EPAM960.55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info