8
Operation
TURNING THE APPLIANCE ON
Plug into an outlet.
Two lines appear on the display indicating that the appliance is
in stand-by.
Press the ON/STAND-BY button (A). When turned on, the air con-
ditioner starts operating in the same mode as when it was turned
off.
Press the MODE button (B) until the light corresponding to the
desired mode lights up:
Light (O): air-conditioning mode
Light (P): dehumidifying mode
Light (N): fan mode
AIR CONDITIONING MODE
Ideal for hot muggy weather when you need to cool and dehu-
midify the room.
The display shows the inner temperature: the light (S) turns on.
To modify the set temperature, push the (E) or (F) button to reach
the desired temperature. The (T) light turns on and the (S) light
turns off. (To change from °F to °C or viceversa, press for few sec-
onds both button E and F).
After 15 seconds, the inner temperature is shown on the display.
The (S) light turns on.
You can adjust the temperature only in air conditioning mode.
Then select the fan speed by pressing the FAN button (C) until the
light corresponding to the required fan speed lights up:
MAX: the air conditioner operates at maximum to achieve the
target temperature as rapidly as possible
MED: reduces noise levels while maintaining a comfortable
temperature
MIN: for silent operation
The most suitable temperature for the room during the summer
varies from 75°F to 81°F (24 to 27°C). You are recommended,
however, not to set a temperature much below the outdoor
temperature
