10
Using the remote control unit
(some models only)
MODELS WITH REMOTE CONTROL
• Point the remote control at the receiver on
the air conditioner. The remote control
must be no more than 16,4 ft (5 metres)
away from the appliance (without obsta-
cles between the remote control and the
receiver).
• The remote control must be handled with
extreme care. Do not drop it or expose it
to direct sunlight or sources of heat.
DESCRIPTION OF THE REMOTE CONTROL
22) "ON/OFF" button
23) Increase /Decrease button for temper-
ature/programmed use
24) "MODE" button
25) "TIMER" button
26) Fan speed selection button
(MAX/MED/MIN).
27) °F/°C scale button
Inserting or replacing the batteries
• Remove the cover on the rear of the
remote control;
• Remove the old batteries, if present.
• Correctly insert two new L03 “AAA” 1,5V
batteries (see the instructions inside the
battery compartment);
• Replace the cover.
TURNING THE APPLIANCE ON
Plug the appliance into the mains.
Press the ON/OFF button (22) (when turned on, the air conditioner starts operating in the same
mode as when it was turned off).
Press the MODE button (24) to select the required mode
COOLING
DEHUMIDIFYING
FAN ONLY
On the control panel, the light corresponding to the selected mode comes on.
For air conditioning/dehumidifying/fan only settings and programming the timer, see page 8-9.
MAX 16,4 ft
MAX 5 metres
If the remote control unit is replaced or discarded, the batteries must be removed and dis-
posed of in accordance with current legislation as they are harmful to the environment. Do not
mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nick-
el-cadmium) batteries. Do not dispose of batteries in fire. Batteries may explode or leak.
22
23
25
27
26
24
