133693
29
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
SINGLE SPLIT
9
ENGLISH
DRY MODE
Dehumidifying mode
Press the MODE button until the DRY symbol (
)
appears.
The appliance activates according to the room and the set
temperature:
If the room temperature is 2°C lower than the set
temperature, the compressor and the outdoor unit stop
while the indoor unit fan operates at low speed.
If the room temperature is 2°C higher than the set
temperature, the appliance automatically passes to the
dehumidifying function, activating the fan at low speed.
TIMER MODE
RESET
ON
OFF
!
+
Note: it is also possible to set the appliance switching-on
and switching-off time so as to define a specific duration of
operation.
Note: the appliance will start in the mode of operation that
was selected before switching off.
RESET
ON
MODE
OFF
!
+
-
INTELLIGENT REMOTE CONTROL
RESET
ON
MODE
OFF
+
-
12:38
PM
ON TIMER
INTELLIGENT REMOTE CONTROL
Automatic switching-on
To set the automatic switching-on of the air conditioner,
proceed as follows:
- With the appliance switched off, press the button TIM-
ER ON (
ON
).
- Set the automatic switching-on time using the (+) and
(-) buttons.
- Press the TIMER ON button within 10 seconds to con-
firm otherwise the function will exit from time setting.
Note: to cancel the function setting, press the TIMER ON
button again.
Automatic switching-off
To set the automatic switching-off time, proceed as follows:
-Pr
ess the TIMER OFF (
OFF
) button.
- Set the automatic switching-off time using the (+) and
(-) buttons.
- Press the TIMER OFF button within 10 seconds to con-
firm, otherwise the function will exit from time setting.
Note: to cancel the function setting, press the TIMER OFF
button again.
88
RESET
ON
OFF
!
+
-
USER
USER
Before setting the timer, ensure that the time on the
remote control is set correctly. If it is not, consult the
instructions given on page 5.
FAN MODE
USER
RESET
ON
MODE
OFF
!
+
-
INTELLIGENT REMOTE CONTROL
OFF TIMER
88
Fan mode
Press the MODE button until the FAN (
) symbol appears.
Every time the FAN button is pressed the speed changes in the
following sequence: AUTO – LOW – MEDIUM – HIGH. The
remote control also stores the speed that was set in the previous
mode of operation.
In the AUTO mode, the air conditioner automatically chooses the
fan speed and the mode of operation (COOLING or HEATING).
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DeLonghi pls 120 ar wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info