Bedienungsanleitung Denon AVC-A1HD (Seite 32 von 120) (Englisch)

469386

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite



Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting

Make detailed settings for various parameters

Speaker Setup

Use this procedure to set the speakers manually

or if you wish to change the settings made with

the auto setup procedure.

F Menu tree F

Manual Setup

Speaker Setup

a Speaker Conﬁguration

s Subwoofer Setup

d Distance

f Channel Level

g Crossover Frequency

h THX Audio Setup

j Surround Speaker

Manual Setup

Front

Select front speaker size.

[Selectable items]

Large

Small

a Speaker Conﬁguration

Select speaker conﬁguration and size.

(bass reproduction capability)

Center

Select center speaker use and size.

[Selectable items]

Large

Small

None

Subwoofer

Select subwoofer use.

[Selectable items]

Yes

Surround A

Select surround speakers A use and size.

[Selectable items]

Large

Small

None

Surround B

Select surround speakers B use and size.

[Selectable items]

Large

Small

None

Surround Back

Select surround back speaker use and size.

[Selectable items]

Large

Small

None

2spkrs

1spkr

• Select “Large” or “Small” not according to the physical size of the

speaker but according to the low frequency reproduction capabilities

based on the frequency set at “Crossover Frequency” (vpage 29,

30).

• When “Front” is set to “Small”, “Subwoofer” is automatically set to

“Yes”.

• If “Subwoofer” is set to “No”, “Front” is automatically set to

“Large”.

• If “Surround A” is set to “None”, “Surround B” and “Surround Back”

are automatically set to “None”.

• When using just one surround back speaker, connect it to the left

channel (SBL).

• To take full advantage of the performance of the Home THX certiﬁed

speaker systems, set the front, center and surround speaker size

parameters to “Small” and the subwoofer to “Yes”.

Large

: Select this for a large speaker with strong bass

reproduction.

Small

: Select this for a smaller speaker with weaker bass

reproduction.

s Subwoofer Setup

Select subwoofer output conﬁguration and bass signal for

playback.

Conﬁguration

Select number of subwoofers and conﬁguration.

[Selectable items]

1SP

2SP L/R

2SP MIX

3SP L/R/LFE

3SP MIX

• THX recommends LFE–THX– mode so that bass interference is less

likely to occur in the room.

• This can be set when the GUI menu “Speaker Conﬁguration” –

“Subwoofer” is set to “Yes”.

• Play music or a movie source and select the mode offering the

strongest bass.

• Select “LFE+Main” if you want the bass signals to always be

produced from the subwoofer.

Mode

Select bass signal for playing with the subwoofer.

[Selectable items]

LFE–THX–

LFE+Main

When “2SP MIX” or “3SP MIX” is selected, “Subwoofer 1”,

“Subwoofer 2” and “Subwoofer 3” are each displayed.

Subwoofer Conﬁguration Subwoofer Connector

1SP SW1

2SP L/R

L SW1

R SW2

2SP MIX

1 SW1

2 SW2

3SP L/R/LFE

L SW1

R SW2

LFE SW3

3SP MIX

1 SW1

2 SW2

3 SW3

Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVC-A1HD Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVC-A1HD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info