Bedienungsanleitung Denon AVR-1909 (Seite 47 von 81) (Englisch)

60741

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

RESTORER

This function restores compressed audio signals to how they

were before compression and corrects the sense of volume of

the bass and treble to obtain richer playback sound.

About the RESTORER function

• Such compressed audio formats as MP3, WMA (Windows Media

Audio) and MPEG-4 AAC reduce the amount of data by eliminating

signal components that are hard for the human ear to hear. The

RESTORER function generates the signals eliminated upon

compression, restoring the sound to conditions near those of the

original sound before compression. It also corrects the sense of

volume of the bass to obtain richer sound with compressed audio

signals.

• This is displayed on the menu and can be set when the analog

signals (including FM/AM signals) or PCM signals (fs = 44.1/48

kHz) are input.

When set to something other than “OFF”, “ ” is displayed.

OFF Mode 1

(RESTORER 64)

Mode 2

(RESTORER 96)

Mode 3

(RESTORER HQ)

The default setting for “iPod” is “Mode3”. All others are set to “OFF”.

[Selectable items]

OFF

Do not use RESTORER.

Mode1

(RESTORER 64):

Optimized mode for compressed sources with very weak highs.

Mode2

(RESTORER 96):

Apply suitable bass and treble boost for all compressed sources.

Mode3

(RESTORER HQ):

Optimized mode for compressed sources with normal highs.

Operating from the main unit or remote

control unit

Press RESTORER.

Night Mode

Optimized setting for late-night listening.

Audio Delay

Compensate for mismatched timing between video and audio.

• This cannot be adjusted when playing in the EXT. IN, DIRECT or

STEREO mode (with “Front Speaker” set to “Large”, “Tone

Control” to “OFF” and “MultEQ”, “RESTORER” and “Night Mode”

to “OFF”.)

• When the Auto Lipsync Correction function is operating, you can set

within the range 0 ~ 100 ms.

• Store “Audio Delay” for each input source.

Delay audio.

This sets the delay time for audio signals.

[Variable range]

0 ms

200 ms

If you wish to adjust the “Audio Delay” while playing HDMI or

component video signals, press u to set “OSD” to “OFF”. This way

the audio delay can be adjusted while watching the picture. (Press u

again to switch to the on-screen display.)

Operating from the remote control unit

Press [AUDIO DELAY], then press [o p] to adjust audio delay.

NOTE

When operating by remote control, the onscreen display is not

shown.

For details on adjusting individual parameters, see “Adjusting the parameters” (vpage 38).

Operating from the remote control unit

Press [NIGHT].

The “ ” indicator lights when “Low”, “Mid” or “High” is

selected.

OFF Low Mid

High

NOTE

• When the “Dynamic EQ” setting is “ON”, setting is not possible.

• When a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD)

signal is input, the “Night Mode” can not be selected.

Set the dynamic range compression of the output audio.

[Selectable items]

OFF

: Turn night mode off.

Low

: Low setting.

Mid

: Middle setting.

High

: High setting.



Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Speciﬁcations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-1909 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-1909

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info