11
ENGLISH
SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see
pages 5 to 9), make the various settings described below on the monitor screen using the AVR-2105’s on-
screen display function.
These settings are required to set up the listening room’s AV system centered around the AVR-2105.
SYSTEM SETUP button
Press this to display the system setup on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons (•, ª, 0, 1)
Press this change what appears on the display.
8
2
Use the following buttons to set up the system:
1
Set the slide switch to “AUDIO”.
• System setup items and default values (set upon shipment from the factory)
System setup Default settings
Speaker
Configuration
Subwoofer
mode
Digital In
Assignment
Input the combination of speakers in your system
and their corresponding sizes (SMALL for regular
speakers, LARGE for full-size, full-range) to
automatically set the composition of the signals
output from the speakers and the frequency
response.
This selects the subwoofer speaker for playing deep
bass signals.
This assigns the digital input jacks for
the different input sources.
Digital
Inputs
Input
source
Front Sp.
Large
Center
Sp.
Surround
Sp.
Surround
Back Sp.
Small Small
Small /
2 spkrs
Subwoofer mode = LFE (Normal)
Front
L
Center
3.6 m
3.6 m
COAXIAL
OPTICAL
1
CD
DVD/VDP
Delay Time
This parameter is for optimizing the timing with
which the audio signals are produced from the
speakers and subwoofer according to the listening
position.
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback
of a video component. For example, if the TV monitor is connected to both the AVR-2105’s S-Video and
video monitor output jacks and signals are input to the AVR-2105 from a video source (VDP, etc.) connected
to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-
Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a
cord to the S-VIDEO MONITOR OUT jack. (For details, see page 18.)
• The AVR-2105’s on-screen display function is designed for use with high resolution monitor TVs, so it may
be difficult to read small characters on TVs with small screens or low resolutions.
• The setup menu is not displayed when headphone are being used.
Subwoofer
Yes
Crossover
Frequency
Set the frequency (Hz) below which the bass sound
of the various speakers is to be output from the
subwoofer.
80 Hz
Front
R
3.6 m
Surround
L
3.0 m
Surround
R
3.0 m
Surround
Back L
3.0 m
Sub-
woofer
3.6 m
Test Tone
This adjusts the volume of the signals output from
the speakers and subwoofer for the different
channels in order to obtain optimum effects.
OPTICAL
2
TV/DBS
OFF
VCR-1
OFF
VCR-2
OPTICAL
3
CDR/TAPE
System setup Default settings
Ext. In SW
Level
Set the Ext. In Subwoofer channel playback level.
Ext. In SW Level = +15 dB
On Screen
Display
This sets whether or not to display the on-screen
display that appears on the monitor screen when
the controls on the remote control unit or main unit
are operated.
A setting to prevent flickering.
On Screen Display = ON / Mode 1
Auto Tuner
Presets
FM stations are received automatically and stored
in the memory.
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/108.0/90.1/90.1/90.1/90.1 MHz
522/603/999/1404/1611 kHz, 90.1/90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
Auto Surround
Mode
Auto surround mode function setting.
Auto Surround Mode = ON
Use the following buttons to set up the system
Auto Setup
The Auto Setup function of this unit performs an
analysis of the speaker system to permit an
appropriate automatic setting.
—
Component
In
Assignment
This assigns the component video
input jacks for the different video
input sources.
Component
Inputs
Input
source
VIDEO 1 VIDEO 2
DVD/VDP
TV/DBS
VIDEO 3
VCR-1
OFF
VCR-2
OFF
V. AUX
—
—
Surround
Back R
3.0 m
Front
L
Center
0 dB 0 dB
Front
R
0 dB
Surround
L
0 dB
Surround
R
0 dB
Surround
Back L
0 dB
Sub-
woofer
0 dB
Surround
Back R
0 dB
F1 ~ F8
G1 ~ G8
90.1 MHz
90.1 MHz
2 Speaker system layout
Basic system layout
• The following is an example of the basic layout for a system consisting of eight speaker systems and a
television monitor:
Subwoofer Center speaker system
Surround speaker systems
Front speaker systems
Set these at the sides of the TV or
screen with their front surfaces as flush
with the front of the screen as possible.
Surround back speaker system
