584190
26
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
This procedure lets you measure the acoustic properties of your
speakers and listening room and make the optimum settings
automatically.
This function provides the optimum listening environment for all
listening positions in a home theater where several people view or
listen to the video or audio source simultaneously.
The measurements are performed by moving the setup microphone
successively to the different positions where the family members
sit within the listening area surrounded by the speakers, as
shown in Example q. For better results, we recommend making
measurements in 6 or more positions.
Even if the home theater is only used by a small number of persons
as shown in Example w, measuring at points around the listening
position results in more effective correction.
Preparations
When using a subwoofer with a setting function, make the following
settings before starting the auto setup procedure:
Volume: “Center”
Crossover frequency: “Maximum”
Low pass filter: Off
Standby mode: Off
NOTE
Do not disconnect the setup microphone until the auto setup
procedure is completed.
When using headphones, unplug the headphones before starting
the auto setup procedure.
Auto Setup
To set the listening environment manually to suit your tastes, see page
26, 27.
1
Connect the included setup microphone to the SETUP
MIC jack on the main unit.
The auto setup screen appears automatically.
2
Mount the setup microphone on a camera tripod,
etc., and set it at the main listening position, with the
sound receptor pointing towards the ceiling.
b Adjust the height of the setup microphone’s sound receptor so
that it is at the height of the ears when listening.
Sound
receptor
Setup
microphone
About the main listening position (*M)
The main listening position refers to the center of the listening
position, or the place where you would sit to watch or listen when
alone.
This position is used as the basis when measuring the distance of
the speakers.
*
M
*
M
Example q Example w
( :Measuring positions)

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
AVR2808CIEU.indd 26 2007/06/20 8:57:58
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon AVR-2808CI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon AVR-2808CI

Denon AVR-2808CI Bedienungsanleitung - Englisch - 93 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info