Bedienungsanleitung Denon AVR-2808CI (Seite 31 von 96) (Englisch)

584190

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NOTE

• It is not possible to convert “1080i” signals into “720p” format.

• It is not possible to convert “720p” signals into “1080i” format.

This can be set when “i/p Scaler” is set to anything other than “OFF”.

HDMI Video Setup

Select HDMI video output device.

i/p Scaler

Make settings for i/p scaler function.

[Selectable items]

A to H

: Use i/p scaler function for analog video signal.

OFF

: Do not use i/p scaler function.

Resolution

Make settings for resolution of HDMI video output signal.

[Selectable items]

Auto

: Detect monitor panel resolution and automatically set

output resolution.

480p/576p

: Output at 480p/576p resolution.

1080i

: Output at 1080i resolution.

720p

: Output at 720p resolution.

1080p

: Output at 1080p resolution.

Progressive Mode

Select optimum progressive mode for video material.

[Selectable items]

Auto

: Automatically detect video material type.

Video1

: Select mode suitable for video playback.

Video2

: Select mode suitable for video and 30-frame ﬁlm material

playback.

This can be set when “i/p Scaler” is set to anything other than “OFF”.

Color Space

Make settings for output color space.

[Selectable items]

YCbCr

: Output using YCbCr format.

RGB

: Output using RGB format.

When connected to a monitor with a DVI-D connector (HDCP

compatible) using an HDMI/DVI converter cable, the signals are output

in RGB format, regardless of this setting.

RGB Range

Make settings for RGB output range.

[Selectable items]

Normal

: Use video range from 16 (black) to 235 (white).

Enhanced

: Video range from 0 (black) to 255 (white). Use this setting

to avoid black washout.

Audio Setup

Make settings for audio playback.

F Menu screen F

2.Manual Setup

2.HDMI Setup

1.Speaker Setup

4.Zone Setup

5.Option Setup

3.Audio Setup

2.2ch Direct/Stereo

3.Dolby Digital Setup

4.Auto Surround Mode

5.Manual EQ

1.EXT.IN SW Level

2-3.Audio Setup

EXT. IN Subwoofer Level

Set the subwoofer level for playback.

Select according to the player in use.

[Selectable items]

0dB

+5dB

+10dB

Select according to the player in use.

+15dB

This is the recommended level.

2ch Direct/Stereo

Make speaker settings for 2-channel mode playback.

Setting

To change the settings, select “Custom”.

[Selectable items]

Basic

: To change the settings, select “Custom”.

Custom

: Make separate settings for 2-channel mode.

z: Use the same settings as in “Speaker Setup”.

Aspect

This sets the aspect ratio when outputting 480i/576i or 480p/576p

input signals from the HDMI output connector.

[Selectable items]

FULL

: Output at 16:9 aspect ratio.

NORMAL

: Output at 4:3 aspect ratio.

This can be set when “i/p Scaler” is set to anything other than “OFF”.



Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

AVR2808CIEU.indd 31 2007/06/20 8:58:04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2808CI Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2808CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info