Bedienungsanleitung Denon AVR-2808CI (Seite 32 von 96) (Englisch)

584190

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Subwoofer Mode

Select low range signal to be reproduced by subwoofer.

[Selectable items]

LFE

LFE+Main

: Select subwoofer signal.

Crossover

Select crossover frequency from which subwoofer handles low range

signal.

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

: Select crossover frequency.

Distance FL

Set distance from listening position to front left speaker.

[Variable range]

0.0ft ~ 60.0ft

0.00m ~ 18.00m

Distance FR

Set distance from listening position to front right speaker.

[Variable range]

0.0ft ~ 60.0ft

0.00m ~ 18.00m

Dolby Digital Setup

Set dynamic range for downmix playback of Dolby Digital

sources.

• Set this to “ON” if the sound from the front speakers seems

distorted.

• When not using the center speaker or surround speakers, the

playback sound is down-mixed and output from the front speakers.

[Selectable items]

: Compression is used. Select this if sound from front

speakers is distorted.

OFF

: Do not use compression. This is the recommended setting.

Auto Surround Mode

Make setting for memorizing surround mode setting for each input

signal type.

• The auto surround mode function lets you store in the memory the

surround mode last used for playing the four types of input signals

listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals

e Dolby Digital and DTS multi-channel signals

r Multi-channel signals other than Dolby Digital and DTS (PCM,

DSD, etc.)

• When playing in the PURE DIRECT mode, the surround mode does

not change even if the input signal is changed.

[Selectable items]

: Memorize settings. Most recently stored surround mode is

automatically selected.

OFF

: Do not memorize settings. Surround mode does not change

according to input signal.

Front

Select front speaker size.

[Selectable items]

Large

Small

: Select front speaker size.

Subwoofer

Select subwoofer use.

[Selectable items]

Yes

: Select subwoofer use.

Manual EQ

Adjust tonal quality for each speaker using graphic equalizer.

Base Curve Copy

Copy the ROOM EQ´s “Flat” correction curve and adjust manually.

[Selectable items]

Yes

: Adjust manually.

: Do not adjust manually.

“Base Curve Copy” is displayed after the auto setup procedure has

been performed.

Adjust CH

Select speaker adjustment method.

[Selectable items]

Each CH

: Adjust tonal quality for each speaker separately.

L/R CH

: Adjust tonal quality for each L/R speaker pair.

ALL CH

: Adjust tonal quality for all speakers together.

Default

Resets the settings to the default values.

Manual EQ

Select the speaker and frequency band and adjust the level.

[Selectable items]

63Hz

125Hz

250Hz

500Hz

1kHz

2kHz

4kHz

8kHz

16kHz

[Variable range]

–20dB ~ +6dB



Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

AVR2808CIEU.indd 32 2007/06/20 8:58:05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-2808CI Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-2808CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info