498663
132
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
128
ENGLISH
Explanation of terms
A
Adobe RGB color, Adobe YCC601 color
Like x.v.Color, each of these color spaces defines
a palette of available colors that is larger than the
traditional RGB color model.
AL24 Processing Plus
AL24 Processing for All Channels
DENON has further developed its proprietary AL24
Processing, an analog waveform reproduction
technology, to support the 192 kHz sampling
frequency. AL24 Processing Plus, thoroughly
suppresses quantization noise associated with D/A
conversion of LPCM signals to reproduce the low-
level signals with optimum clarity that will bring out
all the delicate nuances of the music.
Equipped foe not only front left and right channels
but also for the surround left and right, center and
subwoofer channels.
Audyssey Dynamic Surround Expansion™
(A-DSX)
Realistic reproduction of sound relies on the
ability of audio systems to match human hearing
performance. Three key requirements are: (1)
frequency response, (2) dynamic range, and (3)
accurate spatial reproduction. The requirements for
frequency response have already been surpassed
with sampling rates that exceed human hearing.
The dynamic range limits of human perception
have also been met with current digital audio
systems operating capable of signal to noise ratios
that approach 120 dB. Accurate spatial sound
rendering, however, has not yet reached the limits
of perception as human perception relies on the
combination of sounds arriving from many more
directions than what 5.1-channel surround sound
systems provide. Audyssey DSX technology was
developed to overcome the spatial sound rendering
limitations faced by 5.1-channel surround sound
formats.
The ITU 5.1-channel channel standard recommends
three front loudspeakers and two rear loudspeakers.
The Left (L) and Right (R) front loudspeakers should
be placed at ±30° relative to the central listening
position. The Center (C) loudspeaker should be at
and the surround loudspeakers (SL, SR) should
be placed between 100° and 120°. All loudspeakers
must be equidistant from the center listening
position or compensated with time delay if that
is not possible. A separate low-frequency effects
(LFE) channel is used to reproduce additional bass
content from the subwoofer.
There are certain things that 5.1-channel surround
sound systems do well compared to 2-channel
stereo. For example, it is possible to move sounds
across the front seamlessly. It is also possible
to create ambience behind the listener. But 5.1
channel surround systems do not provide enough
channels from which to render the required
refl ected sound components for a seamless
and enveloping soundstage. Unfortunately,
the additional two back surround channels in
7.1-channel systems are not in the right place to
provide a significant perceptual improvement.
Adding more channels to a surround system is
not for special effects. Accurate spatial sound
reproduction requires rendering of directional
sound cues and non-directional ambient cues.
Refl ections arriving after the direct sound play a
critical role in the perception of soundstage width
and depth. To have the most impact, additional
surround channels should be used to control the
direction, time of arrival, and frequency response
of the refl ected sound to render an expanded
soundstage that reproduces sound with better
localization and envelopment than what 5.1-channel
systems provide.
Research in the perception of auditory source width
has shown that there are strong preferences in the
direction of refl ected sound and the perception of
soundstage width and spaciousness. The single
most important direction of side-wall refl ections
is ±60°. DSX provides a pair of Wide channels
(LW and RW) at ±60° with appropriate frequency
response and perceptual processing to match the
requirements of human hearing. In fact, the Wide
channels are much more critical in the presentation
of a realistic soundstage than then Back Surround
channels found in traditional 7.1-channel systems. A
more enveloping 7.1-channel system is one in which
Wide speakers are used instead of Back Surround
speakers. Adding surround channels behind the
listener has a very small impact compared to the
increase in envelopment and soundstage width that
the front wide channels will provide.
After side refl ections, the next most important
acoustical and perceptual cues come from refl
ections above the front stage. DSX provides a pair
of Height channels (LH and RH) at a ±45° azimuth
angle and elevated to a 45° angle in the median
plane.
In addition to creating new Wide and Height
channels, DSX also provides Surround Processing
to enhance the envelopment of the Surround and
Back Surround channels (if present). DSX Surround
Processing processes the standard surround signals
in the time and frequency domains to improve the
perceived sense of envelopment and blending with
the other speakers in the surround system.
Audyssey Dynamic Surround Expansion is a scalable
system that can adapt to the practical needs of the
user. The first level of surround stage enhancement
comes from adding the Wide channels. The second
level comes from adding the Height channels. If it
is practical to have both Wides and Heights then
the surround performance will be further enhanced.
DSX automatically reconfigures its processing to
optimize surround rendering over any number of
available speakers beyond that of 5.1-channel.
Audyssey Dynamic EQ
®
Audyssey Dynamic EQ solves the problem of
deteriorating sound quality as volume is decreased
by taking into account human perception and room
acoustics. Audyssey Dynamic EQ works in tandem
with Audyssey MultEQ XT 32 to provide well-
balanced sound for every listener at any volume
level.
Audyssey Dynamic Volume
®
Audyssey Dynamic Volume solves the problem of
large variations in volume level between television
programs, commercials, and between the soft and
loud passages of movies. Audyssey Dynamic EQ
is integrated into Dynamic Volume so that as the
playback volume is adjusted automatically, the
perceived bass response, tonal balance, surround
impression, and dialog clarity remain the same.
Audyssey MultEQ
®
XT 32
Audyssey MultEQ XT 32 is a room equalization
solution that calibrates any audio system so that
it can achieve optimum performance for every
listener in a large listening area. Based on several
room measurements, MultEQ XT 32 calculates an
equalization solution that corrects for both time
and frequency response problems in the listening
area and also performs a fully automated surround
system setup.
Auto Lip Sync
If you connect the receiver to a TV that supports the
Auto Lip Sync function, it can automatically correct
delay between the audio and video.
D
Deep Color
This technology allows expression of more number
of colors than the conventional 8 bits and can
reproduce colors close to natural ones without color
streak.
DENON LINK
DENON LINK is a unique digital, balanced transfer
type interface developed by DENON. It offers high
speed, high quality transfer of digital audio data
with low signal loss. It can be used together with
a DENON Blu-ray disc / DVD player equipped with
a special DENON LINK connector using a single
cable to enable playback with high sound quality.
It allows digital transfer of the 192 kHz/24 bit
2-channel digital signals of DVD-Audio discs, PCM
multi-channel signals, etc. Full-spec digital transfer
of the audio contents of Super Audio CD is possible
by connecting a player equipped for DENON LINK
3rd Edition.
During processing of DENON LINK, the
indicator of the display lights.
DENON LINK 4th uses the clock of the AV amplifier
connected by DENON LINK to achieve HDMI signal
transfer with low jitter when playing BD.
DLNA
DLNA and DLNA CERTIFIED are trademarks and/
or service marks of Digital Living Network Alliance.
Some contents may not be compatible with other
DLNA CERTIFIED™ products.
Dolby Digital
Dolby Digital is a multi-channel digital signal format
developed by Dolby Laboratories.
A total of 5.1 channels are played: 3 front channels
(“FL”, “FR” and “C”), 2 surround channels
(“SL” and “SR”) and the “LFE” channel for low
frequencies.
Because of this, there is no crosstalk between
channels and a realistic sound field with a “three-
dimensional” feeling (sense of distance, movement
and positioning) is achieved.
A realistic, powerful sense of presence is achieved
when playing movie sources in AV rooms as well.
1.AVR4311E2_ENG_6th_0810.indd 128 2010/08/12 10:12:26
132

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

denon-avr-4311

Suche zurücksetzen

  • Ich habe ein Brummen im Lautsprecher wenn ich den Schall Plattenspieler laufen lase Eingereicht am 21-7-2020 19:07

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon AVR-4311 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denon AVR-4311

Denon AVR-4311 Bedienungsanleitung - Deutsch - 142 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info