Bedienungsanleitung Denon AVR-590 (Seite 48 von 67) (Englisch)

455822

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

4

ENGLISH

Getting Started Connections Remote Control Information Troubleshooting Speciﬁ cationsSettings

Press .

Press ui to select the speaker.

The speaker that can be set switches each time one of the

buttons is pressed.

Press o p to adjust the volume.

b In the case of a subwoofer, reducing the volume when it is at

“–12 dB” will change the setting to “OFF” (none).

Channel Volume

FL 0.0dB SR 0.0dB

C 0.0dB SBR 0.0dB

FR 0.0dB SBL 0.0dB

SW 0.0dB SL 0.0dB

Fader

FRONT : REAR

[ ]:CH Sel.

Use or i to select “Fader”, then select the item to

be adjusting using o or p.

Press o p to adjust the volume of the speakers.

• The fader function does not affect the subwoofer.

• The fader can be adjusted until the volume of the speaker adjusted

to the lowest value is –12 dB.

Set the items below to the settings you want to save.

q Input source (vpage 34)

w Input Mode (vpage 32)

e Surround Mode (vpage 37)

r Audyssey Settings (MultEQ, Dynamic EQ, Dynamic

Volume) (vpage 41)

t Volume setting (vpage 34)

Press and hold the desired

until “Memory”

appears on the display.

The current settings will be memorized.

NOTE

Input sources stored with the quick select function cannot be selected

if they have been deleted at menu “Source Delete” (vpage 28). In

this case, store them again.

Adjust the volume of the

different speakers

You can adjust the channel level either according to the playback

sources or to suit your taste, as described below.

Saving frequently used settings

(Quick Select Function)

This function allows you to save all the settings shown in step

1. When frequently used settings are saved, they can easily be

set again the next time you want to use them. This function also

allows you to always enjoy the same playback environment.

• Three sets of settings can be saved.

Saving the settings

Press the at which the settings you

want to call out are saved.

Calling the settings out

This function lets you adjust (fade) the sound from all the front (Front

speaker / center speaker / Front Height speaker) or rear (Surround speaker /

Surround Back speaker) speakers at once.

If headphones are plugged in, the headphones settings screen

appears.

GQuick Select DefaultsH

Input Source Volume

Quick Select 1 DVD –40 dB

Quick Select 2 SAT/CBL –40 dB

Quick Select 3 VCR/iPod –40 dB

n Naming Quick Select settings

“Quick Select Name” (vpage 29).

Various memory functions

Adjust the volume of the different speakers

Adjusting the volume of groups of speakers

(Fader Function)

Personal Memory Plus Function

This function sets the settings (input mode, surround mode, MultEQ,

Dynamic EQ, Dynamic Volume, audio delay etc.) last selected for the

individual input sources.

Last Function Memory

This stores the settings as they were directly before the standby mode

was set.

When the power is turned back on, the settings are restored to as they

were directly before the standby mode was set.

Backup Memory

The various settings are backed up for about 1 week, even if the power

is turned off or the power cord is disconnected.

Playback

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-590 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info