Bedienungsanleitung Denon AVR-991 (Seite 81 von 116) (Englisch)

584419

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁrm the setting Return to previous menu

Setting items Setting details

Speaker Conﬁg.

(Continued)

Subwoofer : Set the presence of a subwoofer.

• Yes : Use a subwoofer.

• No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “Subwoofer” is automatically set to

“Yes”.

Surround : Set the presence and size of the surround speakers.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

• None : Select when the surround speakers are not connected.

• When “Surround” is set to “Large”, “S.Back”, “F.Height” and “F.Wide”

can be set to “Large”.

• When “Surround” is set to “None”, “S.Back”, “F.Height” and “F.Wide”

can automatically set to “None”.

S.Back : Set the presence, size and number of surround back speakers.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

• None : Select when the surround back speakers are not connected.

• 2spkrs : Use two surround back speakers.

• 1spkr : Use only one surround back speaker. When you select this

setting, connect the surround back speaker to the left (L) channel.

Even when the “S.Back“ setting is other than “None”, sound may

not be emitted from the surround back speaker, depending on the

playback source. In this case, make “Surround Parameter” – “S.Back”

setting other than “OFF” (vpage72).

NOTE

When “Amp Assign” setting (vpage77) is other than “Normal”, you

cannot make the “S.Back” setting.

F.Height : Set the presence and size of the front height speakers.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

• None : Select when the front height speakers are not connected.

NOTE

When “Amp Assign” setting (vpage77) is other than “Normal”, you

cannot make the “F.Height” setting.

Manual Setup

Setting items Setting details

Speaker Conﬁg.

(Continued)

F.Wide : Set the presence and size of the front wide speakers.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

• None : Select when the front wide speakers are not connected.

NOTE

When “Amp Assign” setting (vpage77) is other than “Normal”, you

cannot make the “F.Wide” setting.

Bass Setting

Set subwoofer and LFE

signal range playback.

Subwoofer Mode : Select low range signals to be reproduced by

subwoofer.

• LFE : The low range signal of the channel set to “Small” speaker size is

added to the LFE signal output from the subwoofer.

• LFE+Main : The low range signal of all channels is added to the LFE

signal output from the subwoofer.

• “Subwoofer Mode” can be set when “Speaker Conﬁg.” – “Subwoofer”

(vpage78) is set to “Yes”.

• Play music or a movie source and select the mode offering the strongest

bass.

• Select “LFE+Main” if you want the bass signals to always be produced

from the subwoofer.

NOTE

If “Front” and “Center” for “Speaker Conﬁg.” are set to “Large”, and

“Subwoofer Mode” is set to “LFE”, no sound may be output from the

subwoofers, depending on the input signal or selected surround mode.

LPF for LFE : Set LFE signal playback range.

• 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz

Distance

Set distance from listening

position to speakers.

Measure beforehand the

distance from the listening

position to each speaker.

Unit : Set the unit of distance.

• Feet / Meters

Step : Set the minimum variable width of the distance.

• 1ft / 0.1ft

• 0.1m / 0.01m

Front L / Front R / Center / Subwoofer / Surround L / Surround R /

S.Back L

/ S.Back R

/ F.Height L / F.Height R / F.Wide L / F.Wide R

: Select the speaker.

z When the “Speaker Conﬁg.” – “S.Back” setting (vpage78) is set to

“1spkr”, “S.Back” is displayed.

• 0.0ft – 60.0ft / 0.00m – 18.00m : Set the distance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-991 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-991

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info