Bedienungsanleitung Denon AVR-991 (Seite 84 von 116) (Englisch)

584419

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

Basic versionSimple version InformationAdvanced version

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁrm the setting Return to previous menu

Audio Setup Default settings are underlined.

Make settings for audio playback.

Setting items Setting details

2ch Direct/Stereo

Select the method for

setting the speakers used

in the 2-channel direct and

stereo playback modes.

Setting : Select the method for setting the speakers used in the 2-channel

direct and stereo playback modes.

• Basic : The settings at “Speaker Setup” (vpage77) are applied.

• Custom : Make separate settings for 2-channel. Make the following

settings:

Front : Set the front speaker size.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

If “Speaker Conﬁg.” – “Subwoofer” (vpage78) is set to “No”, the

setting is automatically set to “Large”.

Subwoofer : Set the presence of a subwoofer.

• Yes : Use a subwoofer.

• No : Select when a subwoofer is not connected.

If “Speaker Conﬁg.” – “Subwoofer” (vpage78) is set to “No”, the

setting is automatically set to “No”. If the “Front” setting is “Small”,

the setting is automatically “Yes”.

Subwoofer Mode : Select low range signals to be reproduced by

subwoofer.

• LFE : When the “2ch Direct/Stereo” – “Front” setting is set to “Large”,

the LFE signal alone is output from the subwoofer. Also, when the “2ch

Direct/Stereo” – “Front” setting is set to “Small”, the front channel low

range signal is added to the LFE signal output from the subwoofer.

• LFE+Main : The front channel low range signal is added to the LFE signal

output from the subwoofer.

This setting can be set made “2ch Direct/Stereo” – “Subwoofer” is

set to “Yes”.

Crossover : Set the maximum frequency of the bass signal output from

each channel to the subwoofer.

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz

• This setting can be set made “2ch Direct/Stereo” – “Subwoofer” is set

to “Yes”.

• If the “2ch Direct/Stereo” – “Front” setting is “Large” and the

“Subwoofer Mode” setting is “LFE”, “Full Band” is displayed and the

setting cannot be made.

Manual Setup

Setting items Setting details

2ch Direct/Stereo

(Continued)

Dist.FL / Dist.FR : Select the speaker.

• 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to

the speaker.

Set so that the difference between the front left speaker and front

right speaker distances is 20.0 ft (6.0 m) or less.

Level FL / Level FR : Select the speaker.

• –12.0dB – +12.0dB (0.0dB) : Adjust the level of each channel.

Auto Surround Mode

Make setting for

memorizing surround mode

setting for each input signal

type.

ON : Memorize settings. Automatically play with the last used surround

mode.

OFF : Do not memorize settings. Surround mode does not change

according to input signal.

• The auto surround mode function lets you store in the memory the

surround mode last used for playing the four types of input signals listed

below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals

e Dolby Digital and DTS multi-channel signals

r LPCM Multi-channel signals

• When playing in PURE DIRECT, the surround mode does not change

even if the input signal is changed.

EQ Customize

Set so that unused equalizer

settings are not displayed

when

MULTEQ is pressed.

The equalizer mode in which

“Not Used” is selected

cannot be stored and

recalled in the Quick Select

function.

Audyssey Byp. L/R : Set when not using “Audyssey Byp. L/R” equalizer.

• Used : Use.

• Not Used : Do not use.

Set so that “Audyssey Byp. L/R” settings can be made when

Audyssey

Auto Setup is performed.

Audyssey Flat : Set when not using “Audyssey Flat” equalizer.

• Used : Use.

• Not Used : Do not use.

Set so that “Audyssey Flat” settings can be made when Audyssey

Auto Setup is performed.

Manual : Set when not using the “Manual” equalizer.

• Used : Use.

• Not Used : Do not use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AVR-991 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AVR-991

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info