(Main unit)
(Remote control unit)
1
Press the automatic search reverse button (8).
• During the search operation, press the automatic search
reverse button (
8) again to move further back to the
beginning of previous track.
Press the automatic search reverse button (8).
3rd track 4th track 5th track
4. Stopping playback temporarily …………………………………………………………………………………………………
Pause
• Use this function to stop playback temporarily then resume from the same point.
(Main unit)
(Remote control unit)
1
During playback, press the pause button (3 PAUSE).
• The pause mode is set.
• Press the play button (
1 PLAY) to resume playback from the
point at which the pause mode was set.
.
• Use this function to select certain tracks from the disc and program them to play in a certain order.
• Up to 30 tracks can be programmed.
1
In the stop mode, press the PROG/DIRECT button.
• The “PROG” indicator lights.
2
Use the number buttons and the +10 button to select the tracks for programmed playback.
• For example, to program the 3rd, 12th and 7th tracks, press , , , and .
72+103PROG/DIRECT
3
Press the play button (1 PLAY).
• The tracks are played in the programmed order.
(Main unit)
(Remote control unit)
• To check the contents of the program, press the CALL button. The programmed tracks appear in the programmed order
on the display each time the CALL button is pressed.
• To change the program, press the CLEAR button while in the stop mode, then program the desired track. The last
programmed track is replaced with the newly input track.
• To clear the entire program, press the PROG/DIRECT or open/close (
5 OPEN/CLOSE) button while in the stop mode.
NOTES:
• The single track repeat mode and A-B repeat mode cannot be set during programmed playback.
• Programs with total playing times of over 99 minutes can be set, but the time will not be displayed properly.
• Programmed playback is not possible with non-finalized discs.
• The direct search operation is not possible during programmed playback.
• Track numbers of 21 or greater can be programmed for discs containing over 20 tracks, but when this is done the time is
not displayed properly.
Select the deck to be operated.
Select the deck to be operated.
Select the deck to be operated.
