516878
52
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
45
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Various playback functions with RC-F400S
n Set and allocate Hot Start points
Assign the Hot Start button for the file or point that you would like
to play back.
0123456789012345678901234567
abcdefg.MP3
abcdefg.MP3
Honey01.MP3
abcdefg05.MP3
FILE LIST
0003
abcdefg00.MP3
0004
abcdefg01.MP3
0005
abcdefg02.MP3
0006
abcdefg03.MP3
0007
abcdefg04.MP3
----
0009
0002
0001
EXIT
LOAD
\ MPGLANG \
Please select
HOTSTART button.
1
On the main screen, press FILE LIST.
The file list is displayed.
2
Select the le you want to set with the jog dial.
Or, pause at the point where you want to resume
playback in the set le.
Press the jog dial to play back the selected file.
3
Press LOAD.
•“Please select HOT START button” is displayed.
•To cancel, press 20.
4
Press the Hot Start button you want to allocate the
setting to.
•“Completed” is displayed and the setting has changed.
•Press the set button to perform Hot Start playback.
Hot Starts can only be set in the stop or cue modes.
n Set and allocate the Hot Start folder
The first 20 files in the selected folder are automatically allocated
to the Hot Start buttons.
01
02
03
FILE LIST
04
05
EXIT
LOAD
\
1
On the main screen, press FILE LIST.
The file list is displayed.
2
Select the folder you would like to set with the jog
dial.
3
Press LOAD.
The first 20 files in the selected folder are automatically
assigned to the hot start button.
“Completed” is displayed, and the settings are completed.
These settings can only be configured during stop or pause modes.
n Save the Hot Start list
Convert the allocated Hot Start list into a file and save it to a
USB device connected to the DN-700C. If this file exists in the
USB device, the Hot Start list in this file is automatically used for
allocation.
1
On the main screen, press HOT LIST.
The Hot Start list is displayed.
2
Press STORE.
•The Hot Start list is saved as “DN-700C.ppl” in the root
directory of the USB device connected to the DN-700C.
•A saved PPL file can be re-read by operating the DN-700C.
NOTE
When the Hot Start list is loaded and any audio file in the list is missing
on the media, that file is removed from the Hot Start list.
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-700C wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info