516878
53
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
46
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Various playback functions with RC-F400S
Playback from the main screen
Jog Dial
Power Switch
F1 - 4
n Before playback
After connecting the DN-700C to the RC-F400S, turn the
power switch on for the respective devices.
•The RC-F400S display shows the startup screen “DENON
PROFESSIONAL”.
•When the startup is completed, the file information is shown in
the display.
n Play back
Press 1/3.
The button lights green and file playback starts.
n Pause
Press 1/3 during playback or search modes.
•1/3 flashes during pause.
•To restart playback, press 1/3.
n CUE
Press 20.
n STOP
Press 20 during stop.
n Repeat playback (0.5 sec)
Press FRAME.
n Switching files (8/9)
During playback or stop, rotate the jog dial.
•Rotate clockwise to switch to the next file.
•Rotate counterclockwise to switch to the beginning of the current
file or the previous file.
•To switch to the previous file, rotate the jog dial counterclockwise
within one second from the start of file playback.
n Fast forward or fast rewind (search)
During playback, press 7 or 6.
•Press 7 to perform fast forward playback.
•Press 6 to perform fast rewind playback.
•The fast forward/fast rewind speed changes in the order shown
below each time the button is pressed.
•CD-DA: x2, x5, x10, x20, x50
•Others: x2, x10, x50, x100, x200
•If the “Search Mode” settings in the “Preset Menu” of the DN-700C
are set to “Normal”, sound is output when the search speed is 2x.
Please note that sound is not output at search speeds above 2x.
•After you fast forward to the end of the last file or fast rewind to the
beginning of the first file, the unit pauses.
•When you fast rewind to the beginning of the file, the fast rewind
operation continues from the end point of the previous file.
NOTE
•When you perform search on a short file, the indicated speed may
not be available.
•You cannot perform search on files that are recorded in VBR.
•If searched files contain a VBR file, the search stops at that VBR file.
n Jump by frames (Frame Accurate Search)
Press 7 or 6 during repeat playback.
•Pressing 7 moves 1 frame in the forward direction.
•Pressing 6 moves 1 frame in the reverse direction.
n AUTO CUE
AUTO CUE automatically detects the audio level and performs the
cue operation.
•When AUTO CUE is enabled, the playback mode display in the
RC-F400S display shows .
•The detected level is the set value for the preset menu “Auto
Cue” in DN-700C (vpage16).
•If the audio level is not detected for 20 seconds or more after the
playback for automatic detection of the audio level has started,
the cue operation is performed at the beginning of the file.
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-700C wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info