Bedienungsanleitung Denon DN-X300 (Seite 5 von 17) (Englisch, Spanisch)

614632

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

ENGLISH

MAIN FEATURES

01. Penny & Giles Crossfader

Smooth and reliable mixing is excelled by Penny &

Giles Crossfader.

02. VCA controlled Channel Fader and Crossfader

03. Channel Fader and Crossfader curve adjustable

This feature allows adjusting the “shape” of the

Crossfader and Channel fader response from a

gentle curve for smooth to the steep pitch

required for top performance cut and scratch

effects.

04. Channel Fader and Crossfader Reverse

05. Channel Fader and Crossfader Start

The CD player can be started or stopped simply by

increasing or decreasing the level of the Ch. fader

or by using the Crossfader left to right or right to

left. (This function can only be used when the

DENON CD players DN-S3000, DN-S5000, DN-

S1000 or etc. is connected to the DN-X300.)

06. Channel Reverse function

This function allows the left hand channel fader or

right hand channel fader to control PGM1 or

PGM2.

07. Enhanced Input/Output terminals

4 LINE, 2 PHONO, 1 AUX, 1 Microphone systems,

2 MASTER outputs and 1 BOOTH output are

provided independently. Effect SEND/RETURN

terminals are also provided for a external effects

processor.

08. 3-Band equalizer/gain

LOW, MID, HI and GAIN controls are available on

every input channel.

09. 3-Band Equalizer Kill function

10. 8 direction placement for input selector

11. Microphone Talkover function

PART NAMES AND FUNCTIONS

(Refer to page 3.)

(1) Top panel

q MIC ON/OFF/TALKOVER switch

• When TALKOVER is selected , all signals except

the microphone level are decreased by 20 dB.

When at the ON or OFF position all signals

remain at their standard levels.

w MIC EQ controls

• Contour the frequency response of the MIC

input –12 dB to +12 dB.

• At the center position, sound is flat.

e MIC LEVEL control

• Adjusts the level of Mic signal.

r AUX INPUT control

• Adjusts the level of AUX input.

• This input is mixed after the Crossfader and

EFFECT LOOP.

t Source EQ controls

• Contour the frequency response of the selected

inputs.

HI and MID:

• Adjusts the high-tone and mid-tone sound –40

dB to +10 dB.

LOW:

• Adjusts the low-tone sound –40 dB to +6 dB.

NOTE:

Clipping may occur if adjustments are set to

harsh.

y GAIN control

• Adjusts the gain of each input channel.

u EFFECT LOOP WET/DRY control

• Use this to adjust the ratio of original and

effected sound.

i EQ ON/OFF button

• When the LED is lit, EQ is ON. Otherwise EQ is

bypassed.

o PGM BALANCE control

• Adjusts the L/R balance of the PGM input.

!0 EFFECT LOOP ON/OFF switch

• Routes the assigned signal through the external

processor attached to the SEND/RETURN

connectors on the rear.

• When the EFFECT LOOP is ON, the LED is lit.

(When the external processor isn’t connected,

the LED will blink.)

!1 CH REVERSE button

• This switch allows the left hand fader or right

hand fader to control PGM1 or PGM2.

• When the CH REVERSE mode is ON, the CH1

fader will be able to control PGM 2 sound and

the CH2 fader will be able to control PGM 1

sound.

NOTE:

Please don’t confuse with the CH 1/2 FADER

REVERSE switch $4.

!2 MASTER LEVEL control

• Adjust the level of the MASTER outputs.

!3 BOOTH OUTPUT control

• Adjusts the level of BOOTH output.

!4 CUE SELECT switch

• This switch is used to select the signal for CUE.

Selected CUE sound will send to the

headphone.

!5 Headphone PAN control

• This function allows you to monitor the CUE

level as well as the MASTER output in your

headphones. A CUE Level may only be

monitored of the CUE signal is selected.

• Serves two purposes…In the STEREO mode it

changes the relative levels of the CUE and

MASTER mixed together in both ear cups. In

the SPLIT CUE mode it changes the balance

between the monaural CUE sound in the left

and monaural MASTER sound in the right.

!6 PHONES LEVEL control

• Adjusts the headphone output level.

– TABLE OF CONTENTS –

MAIN FEATURES ...............................................5

PART NAMES AND FUNCTIONS...................5, 6

CONNECTIONS..................................................7

SPECIFICATIONS................................................8

FADER START ....................................................9

ROTATING INPUT SELECT SWITCHES ...........10

2 ACCESSORIES

Please check to make sure the following items

are included with the main unit in the carton:

q Operating instructions.......................................1

w AC adaptor ........................................................1

(AA-26 : for AC 120 V, AA-27 : for AC 230 V)

2 INTRODUCTION

Thank you very much for purchasing the DENON DN-X300 DJ MIXER.

DENON proudly presents this advanced DJ MIXER to audiophiles and music lovers as a further proof of DENON’s

non-compromising pursuit of the ultimate in sound quality. The high quality performance and easy operation are

certain to provide you with many hours of outstanding listening pleasure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon DN-X300 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info