TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Speci cations
ENGLISH
0
Setting items
Setting contents
DENON LINK Mode
Set the audio output of
DENON LINK.
GOffH : Do not use DENON LINK.
G
2nd
H : Output digital audio using DENON LINK 2nd Edition.
G3rdH : Output digital audio using DENON LINK 3rd Edition.
G4thH : Output digital audio using DENON LINK 4th Edition.
Compatible with jitter-free connection. For more information, refer to
“DENON LINK Connection q Making a Jitter-free Connection” (vpage
18).
HDMI 1 : Improve HDMI1 digital signal jitter.
HDMI 2 : Improve HDMI2 digital signal jitter.
When set to “4th”, the HDMI control function becomes available from
the connected device.
When “4th” is set and jitter-free connection is set up, audio affected
by the jitter-free function is output from the HDMI terminal during
BD playback. When playing back media other than that, video signal
is output from the HDMI terminal and audio signal is output from the
DENON LINK terminal, respectively.
To play DENON LINK 4th signals, connect to a DENON LINK 4th-
compatible AV Amp using an HDMI and a DENON LINK cable.
About the 4th setting of the AV Amp, see the owner's manual of the
AV Amp.
•
•
•
•
•
•
Set the audio signal to be output from the DENON LINK terminal.
Audio Setup
DENON LINK Setup
Default settings are underlined.
Setting items
Setting contents
XLR
Set the signal to be output
from the XLR terminal.
GTerminal PolarityH : Set the polarity of the XLR terminal.
Normal : Normal polarity.
Inversion : Reverse the polarity.
GGain UpH : Can increase output gain when the input sensitivity of a
device connected via XLR is low.
Off : Outputs at standard gain from the XLR terminal.
On : Increase the output gain of the XLR terminal. Set when the input
sensitity of the connected device is low.
The default DVD-A1UD balance model XLR audio connectors pin
alignment is as shown.
q GROUND w HOT e COLD
•
•
•
•
Setting items
Setting contents
User Preset 1/
User Preset 2
This sets the operating mode
for “User Preset 1” or “User
Preset 2” selected by .
Setting each of these items
to “Off” enables output of
high quality analog signals
free of interference from the
associated circuits.
GDigital OutH : Set whether to output signals to the digital audio output
terminal.
On : Enable digital audio output.
Off : Disable digital audio output.
GVideo OutH : Set option of video output.
On : Enable video output.
Off : Disable video output. This setting also disables audio output from
the HDMI terminal.
GDisplayH : Set option for front panel display.
On : Turn on display.
Off : Turn off display.
For more information, see “Playing Back High-quality Audio (Pure Direct
Function)” (vpage 40).
•
•
•
•
•
•
Makes settings regarding digital audio and video output modes during Pure Direct mode,
as well as display messages. Two types of setting can be registered.
Pure Direct Setup
Default settings are underlined.
Signals Compatible with DENON LINK Setting and Transmission
The DENON LINK setting for the DENON LINK version of the connected AV Amp is as follows:
DENON LINK version of
AV Amp
The DENON
LINK setting
of the DVD-
A1UD
Media
BD
(During
jitter-free
connection)
DVD-
Video
DVD-
Audio
Super
audio
CD
CD SD
2nd Edition
(“S.E.” displayed near
terminal)
“2nd”
A S S A S S
3rd Edition
(“3rd” displayed near
terminal)
“3rd”
A S S S S S
4th Edition
(“4th” displayed near
terminal)
“4th”
S S S S S S
n
NOTE
With DENON LINK connections, no audio signals other than those of BD are output from the HDMI
terminal.
(When “DENON LINK Mode” is set to “2nd” and “HDMI Setup” – “SA-CD Audio Out” (vpage 26) is set
to “On”, the audio signals of Super Audio CD are output from the HDMI terminal.)
Remote control operation
buttons
:
Displaying the menu
Cancel the menu
:
Moves the cursor
(Up/Down/Left/Right)
:Decision the setting :Return to previous menu
Setup
