TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Speci cations
ENGLISH
2
Setting items
Setting contents
Screen Saver
Set the screensaver.
Off : Do not use the screensaver.
On : The screensaver function activates when stop or pause status
continues for about three minutes.
Wallpaper
Set to display the background
while playback is stopping.
Picture : Displays the DENON logo.
Black : Set the background to black.
Gray : Set the background to gray.
Blue : Set the background to blue.
Still Mode
Set image quality during
pause.
Automatic : Display automatically using “Field” or “Frame” per the still
image information.
Field : Set when there is a blurred image when “Automatic” image display
is set.
Frame : Set to display non moving images in high resolution.
Slide Show Time
Sets the display time of
JPEG les.
3 ~ 5 ~ 100sec : This sets the display time per frame of a JPEG le during
slideshow playback.
Temporary Display
When the display is set to
“Off” by the Dimmer Control
(vpage 49) or Pure Direct
Function (vpage 40), this
sets it to temporarily display
operations received.
Off : Do not temporarily display operations.
On : Temporarily display operations.
Captions
This setting output a subtitles
signal to a closed caption
decoder (sold separately).
Off : Do not output the closed caption (subtitle) signal.
On : Output the closed caption (subtitle) signal.
Set display-related items.
Display Setup
Default settings are underlined.
Setting items
Setting contents
Auto Power Mode
This setting automatically
sets the power to standby.
Off : Do not use auto power mode.
On : This setting automatically sets the power to standby if any of the
following states continues for approximately 30 minutes.
Disc not loaded
Playback has stopped
Stopped due to resume function
•
•
•
Power Saving
Set power saving mode
during standby.
Power Saving Standby : This is the lowest power consumption mode.
During standby, operations are not accepted via HDMI control or RS-
232C.
Normal Standby : This is the low power consumption mode. During
standby, operations are accepted via RS-232C but not accepted by HDMI
control.
HDMI Control Mode : Setting for turning the power on using an external
device’s HDMI control function or by operation via RS-232C. Slightly
higher power consumption.
Quick Start Mode : Start up time is faster but power consumption during
standby is higher.
Remote Control Setting
(Main unit side)
Set the remote control.
GRemote IDH
Switches the DVD-A1UD’s remote control ID code when other DENON
BD Players are in the vicinity.
DENON 1 : Set the switch in the remote control battery compartment to
“1” as well (“Remote Control Settings (Remote Control Side)” vpage
7).
DENON 2 : Set the switch in the remote control battery compartment to
“2” as well (“Remote Control Settings (Remote Control Side)” vpage
7).
GReceive Legacy RemoconH
Set whether or not to accept remote control signals of a DENON DVD
player or other device.
On : Accept
Off : Do not accept
•
•
•
•
BD Data Utility
Erases data on SD Memory
Card, and initializes cards.
BD Data Erase : Erases both internal memory and SD Memory Card
storage.
Initialize SD Card : Initialize the SD card to be used for the Bonus View
function.
NOTE
Insert or remove a SD Memory Card while the power is in standby.
If you insert a SD Memory Card while the power is ON, the SD Memory
Card may not be read.
The SD card used for the Bonus View function must have a capacity of
1GB or greater. Also the SD card must be initialized on the DVD-A1UD.
This operation will delete all the data. Do not perform this operation
when an SD card containing MP3 or JPEG data is inserted.
•
•
•
Set other items.
Other Setup
Default settings are underlined.
Remote control operation
buttons
:
Displaying the menu
Cancel the menu
:
Moves the cursor
(Up/Down/Left/Right)
:Decision the setting :Return to previous menu
Setup
