Bedienungsanleitung Denon POA-3012CI (Seite 18 von 23) (Englisch)

584590

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite



Getting Started Connections Operations Troubleshooting

ENGLISH

Speciﬁcations

Network Setup

Make settings for wired LAN.

Setup

Wired LAN settings

Use this procedure to conﬁgure the Wired LAN settings.

1Connect the LAN cable (vpage 8).

2Turn on the POA-3012CI (vpage 17).

POA-3012CI performs automatic network setup due to the DHCP

function.

When connecting to a network that has no DHCP function,

perform the setting in step 3.

3Set the IP address at the menu “Network Setup” –

“Network Setup”.

*Network Setup

DHCP

*DHCP

OFF

IP Address

192.168. 0. 1

Subnet Mask

255.255.255. 0

Default Gateway

0. 0. 0. 1

Primary DNS

0. 0. 0. 0

Secondary DNS

0. 0. 0. 0

q Select “DHCP” and press the SELECT / ENTER knob.

Turn the SELECT / ENTER knob to set “DHCP” to “OFF”, then

press the SELECT / ENTER knob.

The DHCP function is disabled.

e Input the address.

w Set “OFF”.

e Use the following buttons to input the address and press the

SELECT/ENTER knob.

b Button functions when entering address

SELECT/ENTER knob : Turn ············Select

Press ··········Conﬁrm

u button : Cursor to right

i button : Cursor to left

ZONE 6 button : Setting during address entry

ZONE 5 button : Cancel entry

IP Address :

Set the IP address within the ranges shown below. The Network

function cannot be used if other IP addresses are set.

CLASS A: 10.0.0.0 ~ 10.255.255.255

CLASS B: 172.16.0.0 ~ 172.31.255.255

CLASS C: 192.168.0.0 ~ 192.168.255.255

Subnet Mask :

When connecting an xDSL modem or terminal adapter directly

to the POA-3012CI, input the subnet mask indicated in the

documentation supplied by your provider. Normally input

255.255.255.0.

Default Gateway :

When connected to a gateway (router), input its IP address.

Primary DNS Secondary DNS :

If there is only one DNS address indicated in the documentation

supplied by your provider, input it at “Primary DNS”. If there are

two or more DNS addresses, input the ﬁrst one at “Secondary

DNS”.

Press the SELECT / ENTER knob.

Setup is complete.

b When connecting to the network via a Proxy server, select

“Proxy” and press the SELECT / ENTER knob (vpage 15 “Proxy

settings”).

q Select “DHCP”.

n Proxy settings

Make this setting when connecting to the Internet via a proxy server.

*Network Setup

Proxy

*Proxy

Address

*Proxy

Proxy Address

*Proxy Address

000.000.000.000

*Proxy

Port

*Proxy Port

00000

q Select menu “Network Setup” – “Network Setup” – “Proxy” and

press the SELECT / ENTER knob.

Turn the SELECT / ENTER knob to set “Proxy” to “ON” and press

the SELECT / ENTER knob.

The proxy server is enabled.

Turn the SELECT / ENTER knob to select the proxy server input

method, and then press the i button.

[Selectable items]

Address : Select when inputting by address.

Name : Select when inputting by domain name.

[Characters that can be input]

A ~ Z a ~ z 0 ~ 9

! # % & ’ ( ) * + , - . / : ; = ˉ ? @ [ \ ] (space)

w Set “ON”.

q Select “Proxy”.

r Input the

address

or domain

name.

e Selecting the

input method

Example) Address

y Input the port

number.

t Select “Port”.

1.POA-3012CI_ENG_101.indd 15 2008/07/30 14:08:28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon POA-3012CI Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info