Bedienungsanleitung Denon RCD-CX1 (Seite 33 von 35) (Englisch)

68410

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Getting Started Connections Setup Playback Setting the Timer Other Functions

ENGLISH

Speciﬁcations



Symptom Cause Countermeasure Page

Buzzing noise in

FM broadcasts.

• The antenna cable is not properly

connected.

• Noise interference from a nearby

electronic device equipped with

a microprocessor, or the radio

broadcast signal is weak.

• Connect the antenna properly.

• Reposition the equipment or the

positions or directions of the

connection cables, antenna, etc.

• Connect an outdoor antenna.

–

Hissing or buzzing

noise is heard in

AM broadcasts.

• Noise interference from a

nearby monitor, etc., or there

is interference in the broadcast

signal.

• Turn off the monitor.

• Change the position or direction

of the AM loop antenna.

• Connect an outdoor antenna.

–

Humming noise

is heard in AM

broadcasts.

• There is interference from current

in power cords.

• Connect an outdoor antenna. –

GTunerH

Symptom Cause Countermeasure Page

When playing

records, a wailing

noise (howling) is

produced when

the volume is

raised.

• The player and speakers are too

close together.

• The ﬂoor is soft and vibrates

easily.

• Move the player and speakers as

far apart as possible.

• Use cushions or spikes to absorb

the vibrations of the speakers

being conveyed from the ﬂoor.

–

GRecord PlayerH

Symptom Cause Countermeasure Page

Disc tray does not

open.

• The power is not on. • Turn on the power. 14

“NO DISC” is

displayed even

though a disc is

loaded.

• The disc is not properly loaded. • Reload the disc. 3

“00 : 00” is

displayed even

though a disc is

loaded.

• A disc other than a CD or Super

Audio CD is loaded.

• Load a CD or Super Audio CD. 3

Playback does not

start even when

the 1/3 button is

pressed.

• The disc is dirty or scratched. • Wipe the dirt off the disc or

replace the disc.

3, 4

No digital signals

are output.

• For Super Audio CDs, no digital

signals are output.

• Turn the pure direct mode on.

• For Super Audio CDs, use the

analog audio output signals.

• Turn the pure direct mode off.

A speciﬁc section

of the disc

cannot be played

properly.

• The disc is dirty or scratched. • Wipe the dirt off the disc or

replace the disc.

3, 4

Programmed

playback is not

possible.

• The tracks have not been

programmed properly.

• Program properly. 17

A CD-R or CD-RW

disc cannot be

played.

• The disc has not been ﬁnalized.

• The recording conditions are bad

or the quality of the disc itself is

poor.

• Finalize the disc then play it.

• Use a properly recorded disc.

–

Files recorded

in MP3 or WMA

format cannot be

played.

• You have selected a copyright-

protected WMA ﬁle or a ﬁle that

cannot be played normally.

• Press the

8 or 9 button to

select a different ﬁle.

GCDH

Symptom Cause Countermeasure Page

iPod cannot be

played.

• Device you want to play and set

input source do not match.

• Cable is not properly connected.

• Control dock for iPod’s AC

adapter is not connected to

power outlet.

• Select an appropriate input

source.

• Reconnect.

• Plug the control dock for iPod’s

AC adapter into a power outlet.

–

GiPodH

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon RCD-CX1 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon RCD-CX1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info