163896
7
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
E6
GENERAL OPERATIONS
Turning the unit ON/OFF (PWR)
Head Unit: Press PWR to turn on the unit. To turn off, press and hold this button again.
Remote Control: Press button to turn on the unit. To turn off, press this button again.
Setting Time
1 Press DISP button repeatedly until time shows.
2. Press and hold DISP button. Hour digit starts blinking.
3. Rotate Volume knob to adjust hour. Press DISP
4. Rotate Volume knob to adjust minute.
5. Press SEL to save and exit.
Selecting a source (MD)
Head Unit: Press MD repeatedly to switch between TUNER, AUX and CD/DVD mode.
Remote Control: Press MODE repeatedly.
Loading a Disc
1 Press REL to open the front panel
2 Insert a disc into the disc loading slot
3 Close the front panel
Ejecting a Disc
1 Press REL to open the front panel
2 Press the EJECT button to eject disc
3 Close the front panel
Adjusting the volume
Head Unit: Rotate VOL knob right or left to increase or decrease volume.
Remote Control: Press VOL+ or VOL- to increase or decrease volume
Adjusting the BASS/TREBLE/BALANCE/FADER/TA VOLUME
Head Unit: Press VOL knob repeatedly until desired feature appears, rotate VOL knob to make
adjustments.
Remote Control: Press SEL repeatedly until desired feature appears. Press VOL+ or Vol- to make
adjustments.
Mute Button
Head Unit: Press and hold the MU button to mute the sound at once. Press again to return to previous
volume level.
Remote Control: Press button to mute the sound at once. Press again to return to previous volume level.
Display (DISP)
When this key is pressed, it is operated as the conversion of each display mode as follow.
1) In case of receiving RDS station.
RADIO MODE
PS ---- CT ---- FREQ ---- PTY
CD/MP3 PLAYER MODE
CDP ---- CT ---- PS ---- FREQ ---- PTY
2) In case of receiving NON RDS station
RADIO MODE
CLOCK ---- FREQ ---- NO PTY
CD/MP3 PLAYER MODE
CDP ---- CT ----FREQ ---- NO PTY
Each display time is several seconds, and come back to 1’st position after several seconds.
Note: CT = clock time • FREQ = frequency • CDP = CD Player
Loudness Button (BAND/LOUD)
By pressing this key longer than 2 sec., you can select LOUDNESS mode.
PAL / NTSC system
Press this button to switch between PAL, NTSC, AUTO system.
Press BAND button on the head unit or SYS button on the remote control, unit automatically switches
between PAL, NTSC, AUTO system.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denver cad-510 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Denver cad-510

Denver cad-510 Bedienungsanleitung - Deutsch - 14 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info