Bedienungsanleitung Denver cad-510 (Seite 8 von 14) (Englisch)

163896

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Reset

• Reset button is placed on the housing.

• The reset button is to be activated for the following reason:

- Initial installation of the unit when all wiring is completed.

- All the function button does not operate.

- Error symbol on the display.

LISTENING TO RADIO

Band button (BAND)

Each band is toggled cyclically by pressing this key FM1---FM2---FM3.

Automatic or Manual tuning (FREQ UP OR FREQ DOWN )

When pressed short, these keys are operated as SEEK tuning mode.

When pressed longer than 1 sec., they are operated as MANUAL tuning mode.

Note: The unit automatically switches back to SEEK tuning mode after 5 sec. if no input was detected

during MANUAL tuning mode.

Auto seek/Preset scan (A/PS)

Preset Scan (PS) - By pressing shortly, the radio plays each preset station for 5 seconds.

Auto Seek (AS) - By pressing longer than 1 sec, auto seek is activated. The 6 strongest stations are

preset and stored in the corresponding preset number. When Auto Seek operation is finished, the radio

executes the preset scan.

Note: This feature is called AMS on the remote control.

Scan automatic tuning control (SCN)

This key is operated as RADIO SCAN. The operation is similar as normal search but different thing is

holding 5 seconds on every station detected.

Storing and recalling broadcast frequencies

If you press any of the NUMBER (1-6) you can easily store up to six broadcast frequencies for later

recall with the touch of a button.

1. Choose a desired BAND (FM1-FM2-FM3).

2. When you find a frequency that you want to store in memory, press a NUMBER (1-6) and hold until

the preset number shows and lit in the display.

3. The number you have pressed will remain lit. The selected radio station frequency has been stored

in memory. The next time you press the same NUMBER (1-6) the radio station frequency is recalled

from memory.

Note: Up to 18 FM stations can be stored in the memory.

Stereo/Mono

Head Unit: Press and hold AF button to switch between stereo or mono sound.

Remote Control: Press ST button

USING THE RDS FUNCTION

What is RDS?

The RDS (Radio Data System) is a digital information system developed by the EBU (European

Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services

and automatic retuning functions for RDS-compatible car stereos.

In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden.

Test transmissions are being conducted in many other european countries. It is expected that RDS will

be available in most western european countries in the near future.

‘AF’ function (Alternative frequencies)

When pressed short, AF switching mode is selected.

When AF switching mode is selected, the radio check the signal strength of the AF all the time.

‘TA’ function (Traffic announcement)

When pressed short, it is activated as TA mode on or off

When TA mode is on and traffic announcement is transmitted.

– When the unit is it CD/MP3 mode, it will switch to radiomode temporarily.

– If the volume level was under the threshold point, it will be raised to the threshold point.

– When TP station is received, TP segment is turned on in LCD display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver cad-510 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver cad-510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info