Bedienungsanleitung Denver MRP-161 (Seite 29 von 73) (Alle Sprachen)

695741

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

EN-4

Recording

A. Recording from tape (deck 2 to deck 1)

This unit enables you to duplicate a pre-recorded tape to another tape. It is performed only one way from deck 2 (playback) to deck 1

(recording).

Dubbing at normal speed

 Select “ Tape ” mode from function button (10) and then set the High speed dubbing button (6) at “ nor. “ position

 Inset a pre-recorded cassette into deck 2 and a blank cassette tape into deck 1.

 Press the “ Pause ” key and then press the “ Record ” and “ Play ” key at deck 1.

 Press the “ Play ” key to start playback at deck 2 & then release “ Pause ” key at deck 1 to start dubbing.

 Press “ Pause ” key at deck 1 & “ stop ” key at deck 2 when finish dubbing.

Dubbing at high speed

This unit is quipped with a high speed dubbing system which can save the time for dubbing by 2/3 when compare to normal speed.

 Press the dubbing button (6) to “ hi ” position and then follow the same procedures as stipulated in “dubbing at normal

speed”.

 When dubbing a pre-recorded cassette tape at high speed, a chattering sound is being heard. To avoid this, set the volume control

to a minimum level.

 Do no press the “ High speed dubbing ” button (6) to hi or nor. position during dubbing, this will vary the speed of recording and

may be damage the cassette tape.

B. Recording from radio

 Select “ Tuner ” mode from function button (10)

 Tune to the desired station and insert a blank cassette tape in deck 1.

 Press “ Record ” & “ Play ” key to start recording.

 Press “ Pause ” keys and then “ Stop/Eject ” key when finish.

C. Recording from CD

 Select “ CD ” mode from function button (10).

 Insert a black cassette tape in deck 1 which suitable for recording.

 Press “ Pause ” key first and then “ record ” & “ play ” key at cassette. Recording function is now on standby.

 Start playback CD, and then press “ Pause key ” at cassette to start recording.

 To stop recording, press “ Stop ” button (8) on CD mode first, then press the “ Pause ” key and then “Stop/Eject ” key

on cassette tape deck.

D. Recording from turntable

Select “ Phono ” mode from function button (10).

insert a blank cassette tape in deck 1.

Press “Record ” & “ Play ” key to start recording.

Select the desire record and start playback

Press “ Pause ” keys and then “ Stop/Eject ” key when finish.

More features

A. Sleep function

1. Press “ Sleep ” button (4) and sleep indicator “ will ”shown on the LCD display (2).

2. Keep pressing the button to adjust the sleep timer in the order from 10>20>30….90 minutes respectively.

3. System will stop and go to standby mode automatically after the selected timing.

4. To cancel the sleep mode, press “ Sleep ” button until the display show “OFF” and “ “ indicator disappear on LCD display

(2).

Remark:-

If press the sleep button once and the “ ” indicator appear on the LCD display (2), the system will go to standby mode

automatically after selected minutes.

B. Timer on setting

This function allows the system to turn on automatically and wake you up by CD or Radio mode respectively.

1) Wake up time : First, set the unit at standby mode and then press & hold the “ Timer ” button (22) to enter the timer setting mode,

the first two digits of clock will flashing. Press skip up / down ” button (25,12) to set the hour & then

press “ Timer ” button (22) again to confirm. Then press skip up / down ” button (25,12) to set the

minutes & press “ Timer “ button (22) to confirm.

2) Wake up source : Press the “skip up / down ” button (25,12) to select the source from “CD” - “ FM ” repeatedly. Press

“ Timer“ button (22) again to confirm selected the source .

3) Wake up volume : Press skip up / down ” button (15,21) to set the wake up volume level from 1 to max. And then press

“Timer” button(22) to confirm

The system will turn on automatically from standby mode once it reach the selected time and the timer indicator “ ” will flash on the

display and unit will switch off automatically after running 60 minutes. Press “Timer”(22) or “On/Standby” (7) button can switch off the

timer function at any time.

Remark:-

 If there is no music source being detected (such cd) when the preset time is reached, system will default to “ radio ” function for

wake up mode automatically. The system will preset at the latest radio frequency being listened before switching off

 For tuner wake up, the system will preset at the latest radio frequency being listened before switching off.

 Active/de-active timer function

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver MRP-161 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver MRP-161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info