Bedienungsanleitung Denver TDA-60 (Seite 6 von 8) (Englisch)

695139

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

3. Once all the stations were automatic preset, press the “PRE. / FOLDER” button to choose preset stations.

Show FM information

Press the “INFO” button to show the following information, if broadcast by a radio station.

• Radio Text is shown by default on the display. If no information is available, [No RadioText] appears on the display.

• The program type (PTY) of the station is displayed (e.g. Pop music, news etc.). If no PTY is received, [No PTY]

appears on the display.

• Display the time. If no TIME is received, [No Time] appears on the display.

• Display the date. If no DATE is received, [No Date] appears on the display.

Playing CDs /MP3

1. Select the CD mode with the “STANDBY / FUNCTION” button, until “CD” is shown in the display.

2. Open the CD compartment by pulling the lid upwards by the tab.

3. Insert an audio CD with the printed side facing upwards on to the central cone so that the CD clicks into place and then

close the lid of the CD compartment.

4. The CD will play from the first title.

5. In order to remove a CD, please press the STOP button, open the CD compartment and lift the CD out carefully.

Always keep the CD deck closed.

NOTE:

•if a disc is inserted the wrong way around, respectively if no disc is inserted, then the message “NO “ appears in the display.

• Playback of CDs produced by the user cannot be guaranteed due to the large variety of software and CD media available.

DAB Menu

In DAB mode, press the “STOP/MENU” button to enter the DAB menu.

The DAB menu is divided into menus: Full scan, Manual tune, DRC and Prune.

• Full scan: Starts the station scan. The DAB frequency band is scanned for stations.

• Manual tune: To do so you need to know the station frequency. This can be found on the internet site of the broadcasting

service. Select individual frequencies using the “ENTER / PLAY / PAUSE / CLOCK” button.

• DRC: short for Digital Range Control (dynamic range). The term DRC describes the ratio between the quietest and the

loudest sound. If the dynamic range is very high there are very soft sounds as well as very loud sounds.

Under some circumstances this may present a problem with playback. Let us assume that you are listening to a radio station

in a relatively loud environment. By increasing the volume you can play the quiet sections louder.

This however has the disadvantage that the loud sections become uncomfortably loud. It makes sense here to reduce the

dynamic range. Select between the options:

- DRC off: The dynamic range is not reduced.

- DRC high: The dynamic range is sharply reduced.

- DRC low: The dynamic range is slightly reduced.

• Prune: It may be that you can no longer receive some stations after a station scan or change of location. With this function

you can delete these stations from the reception list. Select “YES” and confirm with the “ENTER / PLAY / PAUSE / CLOCK”

button.

FM Menu

• Scan setting: Select the desired option for automatic station search.

- All stations: Search for all stations that can be received. In this case, station search also stops for weak stations.

- Strong stations only: Only clear stations are searched.

• Audio setting: Select the MONO or STEREO for FM reception.

DAB + FM Menu (SYSTEM)

The following sub menus can be found in the SYSTEM menu.

- Language: Change the OSD language.

- Time update: You can chose the method how to update the time.

- Factory reset: Select the “YES” command if you want to reset the device again to the factory defaults. All settings which you

have made will be lost.

• SW version: Here, you can display the Software Version of the device.

Playing music via USB

This device has been developed in line with the latest technical advances in the USB field. The wide range of different

USB storage devices of all types which are currently on the market, unfortunately do not allow us to guarantee full

compatibility with all USB storage devices. For this reason, in rare cases there may be problems in playing back files from USB

storage devices. This is not a malfunction of the device.

1. Select the USB mode with the “STANDBY / FUNCTION” button, until “USB” is shown in the display.

2. Connect a USB storage device directly into the port. Playback will automatically start after a few seconds.

For operation, please refer to the section “Description of the control buttons”.

NOTE:

• Always directly connect a USB storage medium to the USB port to prevent any malfunctions.

• The USB port is not designed for charging external devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver TDA-60 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver TDA-60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info