Bedienungsanleitung Denver TDA-60 (Seite 7 von 8) (Englisch)

695139

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

CAUTION:

Switch the device to a different operating mode before you remove the USB storage device

Description of the control buttons

NOTE:

Not all the functions may be supported depending on the playback device.

ENTER / PLAY / PAUSE / CLOCK

• You can briefly interrupt and resume playback using this button. The display shows the elapsed playback time flashing.

Pressing again continues playback.

• Press and hold this button during operation to briefly display the current time.

SKIP+ & SKIP-

With “SKIP+ / TUNING+” button you can jump to the next or previous track etc.

• If the button is kept pressed down, the machine starts to search through the tracks.

The “SKIP- / TUNING-” button can be used as follows:

Press once = This starts the current track again from the beginning.

Press twice = This jumps back to the previous track.

STOP

The playback is stopped.

Volume

You can set the desired volume with the “VOLUME- / ALARM 1” or “VOLUME+ / ALARM 2” button.

MODE

• In stop mode for programming any order of tracks (see the section on “Programmed Play”).

During the playback of an audio CD:

Press once = the normal play mode.The display will show “Normal”.

Press twice = the current track is repeated continuously. The display will show “Repeat ONE”.

Press three times = the whole CD is played continuously. The display will show “Repeat ALL”.

Press four times = all tracks will be played in random order. The display will show “Random”.

Press five times = back to the normal play mode.

During playback of MP3 music(Under USB mode):

Press once = the normal play mode.The display will show “Normal”.

Press twice = the current track is repeated continuously. The display will show “Repeat ONE”.

Press three times = the selected folder is repeated continuously. The display will show “Repeat FOLDER”.

Press four times = the whole CD is played continuously. The display will show “Repeat ALL”.

Press five times = all tracks will be played in random order. The display will show “Random”.

Press six times = back to the normal play mode.

PRE. /FOLDER

1. Use the “PRE. / FOLDER” to enter the enter the mode.

Programmed Play

This can be used to program any desired sequence of tracks.

1. Press the “STOP” button.

2. Press the "AMS / MODE" button. “P_01” will start to flash..

P_01 means the storage space

Use the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons to select the desired track and then press the "AMS / MODE"

button again.

The display “P-01” will be changed to “P_02”.

3. Select the next track with the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons and press the "AMS / MODE" button

again. Repeat the procedure until all the desired tracks are selected.

NOTE:

Once the storage capacity of the tracks to be programmed has been reached “PROGFULL” will show in the display.

4. Press the “ENTER / PLAY / PAUSE / CLOCK” button. The playback starts.

The upper-left of the display will show “MEM”.

5. Press once the button to stop the playback while retaining the program.

6. To play the programmed back again, press the “ENTER / PLAY / PAUSE / CLOCK” button.

7. To delete the program, press the “STOP” button twice. The notification “MEM” will disappear.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in MP3 format. The device also supports all standard CD types:

CD, CD-RW, CD-R.

This machine of is able to play MP3 CDs. Up to 99 track scan be compressed and stored on these CDs. Your machine detects an

MP3 CD automatically (the total number of tracks and MP3s appears in the display). If you would like to play one of these

CDs, proceed as described under “Playing CDs/MP3”. Tracks can be programmed as described under “Playing Back

Programmed Tracks”.

AUX IN socket

Via this socket you can also hear the sound of other playback devices such as MP3 players, CD players etc. through the

loudspeakers.

1. Please connect the external device with a 3.5 mm stereo jack plug to the AUX-IN socket.

2. Repeatedly press the “STANDBY / FUNCTION” button, until “AUX” is shown in the display.

3. You will hear the sound playback from the external device through the loudspeakers. You may adjust the volume with

“VOLUME- / ALARM 1” or “VOLUME+ / ALARM 2” buttons. The CD buttons are not functional.

4. For the remaining procedure please see the operating instructions of the external sound source.

NOTE:

Adjust the volume of the external device to a comfortable level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denver TDA-60 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denver TDA-60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info