1.3 Inspection plan for annual inspection
We reserve the right to modify the inspection plan.
Pos. Component Activity Interval
1 Skylights Remove the inside frame
of the skylights and tight-
en the screw connections
of the securing clips
1st year
2 Front wheel Lubricate, check wheel
rims for damage, visual
check of the tyres, check
threaded spindle and
crank
Annually
3 Corner steadies Lubricate Annually
4 Joints, hinges and levers on the
chassis
Lubricate Annually
5 Underbody Visual check, repair un-
derbody protection as
necessary
Annually
6 Chassis Lubricate Annually
7 Wheel attachment Tighten the wheel nuts,
check tyre bearings
Annually
8 Tyres and wheel rims Air pressure check (see
Section 14.7), visual
check for damage, tread
depth at least 2 mm
Annually
9 Brakes, brake lining Check and adjust if nec-
essary; lining thickness
min. 1.6 mm
Annually
10 Outside lighting Function check Annually
11 Refrigerator, heater, kitchen-
ette, storage flap locks, water
system, interior electrics
Function check Annually
12 Upholstery, curtains, blinds Visual check Annually
13 Windows, skylights Function check, water in-
gress test, applying talc
to the rubber seals
Annually
14 Sealing strips, edges, -rubber Check for damage Annually
15 Brake drums Visual check for wear and
rust, check spring tension
Every two
years
16 Axle bearing Check the slack Every two
years
17 Slotted nut on the wheel Check position and dum-
my fuse
Every two
years
18 Overrun brake Function check Every two
years
19 Brake cable assembly Visual check Every two
years
20 Chassis underbody Check bolts are firmly se-
cured
Every two
years
21 Gas system Official gas inspection Every two
years
