1.4 Inspection plan for leak test
We reserve the right to modify the inspection plan.
Pos. Component Activity
1.1 Wheel housing Visual check
1.2 Rear wall floor plateau connection Visual check
1.2.1 Side wall in the direction of travel left connection Visual check
1.2.2 Side wall in the direction of travel right connection Visual check
1.3 Front wall floor plateau connection Visual check
1.3.1 Side wall in the direction of travel left connection Visual check
1.3.2 Side wall in the direction of travel right connection Visual check
1.4 Side wall floor plateau right connection Visual check
1.5 Side wall floor plateau left connection Visual check
1.6 Connection to driver's cabin Visual check
1.7 Base frame with base frame cut-outs Visual check
1.8 Check the status of the outer metal sheets Visual check
1.9 Check the status of the window rubbers, expansion
joints, sealing joints
Visual check
2.1 Measure the floor plateau at this connection point
with a moisture measuring device, write down the
corresponding values with the date of the assess-
ment. Prescribed maximum values – up to 20%
normal.
If the values lie above 20%, check if it is due to ac-
cumulated condensation.
Measuring
2.2 Measure inside the vehicle (walls, window sections,
roof, etc.), note changes in the colour of the decor.
Prescribed maximum values – up to 20% normal.
If the values lie above 20%, check if it is due to ac-
cumulated condensation.
Measuring
3.1 Wheel housing Spray with Dethleffs spe-
cial weatherproof solu-
tion
3.2 Rear wall floor plateau connection Spray with Dethleffs spe-
cial weatherproof solu-
tion
3.3 Front wall floor plateau connection Spray with Dethleffs spe-
cial weatherproof solu-
tion
3.4 Side wall floor plateau right connection Spray with Dethleffs spe-
cial weatherproof solu-
tion
3.5 Side wall floor plateau left connection Spray with Dethleffs spe-
cial weatherproof solu-
tion
