Bedienungsanleitung DeWalt D 28492 (Seite 27 von 105) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

78707

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

ENGLISH

Release the unlocking switch (3).

● For continuous operation, press and hold down

the switch (1), press the lock-on button (2) and

release the switch.

● To stop the tool, release the switch.

● To stop the tool in continuous operation, press

the switch brieﬂ y and release it. Always switch

off the tool when work is ﬁ nished and before

unplugging.

On/off switch (1) with unlocking switch (3)

(France only)

● To run the tool, depress the unlocking switch (3)

and subsequently operate the on/off switch (1).

Release the unlocking switch (3).

● To stop the tool, release the switch.

Do not switch the tool on or off when

under load.

Metal applications

● When using the tool in metal applications, make

sure that a residual current device (RCD) has

been inserted to avoid residual risks caused by

metal swarf.

● If the power supply is shut off by the RCD, take

the tool to authorised D

E WALT repair agent.

In extreme working conditions,

conductive dust can accumulate inside

the machine housing when working with

metal. This can result in the protective

insulation in the machine becoming

degraded with a potential risk of an

electrical shock.

To avoid build-up of metal swarf inside the

machine, we recommend to clear the ventilation

slots on a daily basis. See "Maintenance".

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your D E WALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Clearing the ventilation slots

To avoid build-up of dust inside the machine,

we recommend to clear the ventilation slots on

a daily basis.

● Unplug the machine.

● Blow dry compressed air through the ventilation

slots.

● Clear the ventilation slots using a soft brush or

dry cloth. Do not use metallic objects as these

might damage the internal parts.

Protecting the environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁ nd one day that your D E WALT product

needs replacement, or if it is of no further use to

you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products

and packaging allows materials to be

recycled and used again. Re-use of

recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate

collection of electrical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.

D E WALT provides a facility for the collection and

recycling of D

E WALT products once they have

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D 28492 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt D 28492

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info