Bedienungsanleitung DeWalt D21583K (Seite 37 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544690

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

ENGLISH

• Always use a water cooling device and a

water collection system.

• Always use core bits designed for wet drilling.

• Do not use the machine handheld with core

bits larger than 40 mm.

• Always mount the drill on a stand when

drilling holes larger than 40 mm.

• The maximum water pressure is 3 bar. Use

a pressure relieve valve in case of a higher

water pressure.

• Use only pure tap water for cooling

purposes.

• Prevent water from entering the motor or

other electrical components. Make sure the

PRCD is not in contact with water.

Safe Operation for Stationary Stands

• A machine incorrectly assembled may

cause a hazardous situation. Carefully fix the

machine into the drill stand and check that

the drill stand holder is secured.

• Fixing the drill stand with vacuum device can

lead to dangerous situations.

• Check the surface where the drill stand shall

be fixed. surface such as irregular (rough) can

significantly reduce the effectiveness of the

suction system. Coated or laminated surface

can be pulled off during work.

• The minimum vacuum level shall not be lower

than 600mbar. Periodically control this value

on the pressure gauge.

• Do not use drill core bits with a diameter

greater than 70mm at this application.

Additional Instructions for Use in

Stationary Position

SAFETY PRECAUTIONS

• Hazardous situation due to broken parts.

Always check the core bits before using.

Never use deformed or damaged drill core

bits.

• Use of non-recommended cutting tools,

which can lead to injuries due to the loss

of control. Use only core bits which are

designed for this tool and consider the

minimum and maximum diameter and length

of those core bits.

• Incorrect clamping and positioning of the

core bit may lead to dangerous situation by

broken and ejected parts of the drill core bit.

Ensure that the drill core bit is assembled and

adjusted correctly. Tighten the core bit with

sufficient fastening torque.

• Always wear suitable protective equipment

(PPE) such as:

• Hearing protection, to reduce the risk of

induced hearing loss

• Gloves, when handling core bits or rough

material, to reduce injuries by sharp edges

• Safety glasses, to prevent injuries by flying

particles

• Non-slipping footwear, to prevent injuries

caused by slippery surfaces

• Hazardous situation due to dust production

when drilling without water supply. Use a

dust extraction device, if any, or at least a

dust mask.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

The following factors increase the risk of breathing

problems:

– No dust extractor connected when performing

dry operation

– Insufficient dust extraction caused by uncleand

exhaust filters

Markings on Tool

The following pictograms are shown on the tool:

Safe use warning

Read instruction manual

before use

Wear ear protection

Wear eye protection

Always wear a dust mask

Always wear safety shoes

Always wear safety gloves.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D21583K Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info