Bedienungsanleitung DeWalt D23700 T 2 (Seite 33 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546195

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

ENGLISH

b) Adjust the riving knife as described in

this instruction manual. Incorrect spacing,

positioning and alignment can make the riving

knife ineffective in preventing kickback.

c) Always use the riving knife except when

plunge cutting. Riving knife must be replaced

after plunge cutting. Riving knife causes

interference during plunge cutting and can

create kickback.

d) For the riving knife to work, it must be

engaged in the workpiece. The riving knife is

ineffective in preventing kickback during short

cuts.

e) Do not operate the saw if riving knife is

bent. Even a light interference can slow the

closing rate of a guard.

Additional Safety Instructions for

Circular Saws

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Wear a dust mask.

• Do not use blades of larger or smaller

diameter than recommended. For the proper

blade rating refer to the technical data. Use only

the blades specified in this manual, complying

with EN 847-1.

• Never use abrasive cut-off wheels.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing .

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

DATE CODE POSITION (FIG. 1)

The Date Code (ff), which also includes the year of

manufacture, is printed into the housing.

Example:

2010 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Circular saw

1 Parallel fence

1 Saw blade wrench

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. On/off switch

b. Lock-off button

c. Front handle

d. Spindle lock

e. Dust extraction outlet

f. Saw shoe

g. Riving knife

h. Lower guard retracting lever

i. Lower blade guard

j. Saw blade

k. Bevel adjustment knob

l. Mark for bevel cut

m. Mark for straight cut

n. Depth adjustment knob

o. Parallel fence

INTENDED USE

Your D23700 circular saw has been designed for

professional sawing of wood and plastic.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

This circular saw is a professional power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D23700 T 2 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info