Bedienungsanleitung DeWalt D24000 T 2 (Seite 41 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546603

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

• Remove the water collectors.

• Lift the machine out of the water basin as shown.

• Place the collectors into the water basin in the orientation as shown.

• Turn the water basin upside down.

• Place the edge guide and the extension table into the water basin in

the orientation as shown.

WARNING: When carrying the machine, always seek

assistance. The machine is too heavy for one person to

handle.

Maintenance

Your DEWALT power tool has been designed to operate over a long period

of time with a minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Draining the water basin (ﬁ g. X)

The water basin must be drained after each use.

• Place the water pump on the tray (75).

• Place a suitable container under the drain plug (29).

• Remove the drain plug.

• Allow ample time for the liquid to drain.

• After the liquid has been drained, re-install the drain plug.

• Dispose of the liquid with due care for the environment.

Adjusting the table rolling resistance (ﬁ g. Y)

To take out the clearance between the table and the rails, proceed as

follows:

• Loosen the rail height screws (76).

• Adjust the rail height adjusters (77) until the table moves smoothly.

• Tighten the rail height screws.

Cleaning

Before use, carefully check the cutting disk guard to determine that it will

operate properly. Ensure that mud, or work-piece particle cannot lead to

blockage of one of the functions.

In case of workpiece fragments jammed between cutting disk and guard

disconnect the machine from the power supply and follow the instructions

given in section “Mounting the cutting disk”. Remove the jammed parts

and reassembling the cutting disk.

Keep the ventilation slots clear and regularly clean the housing with a soft

cloth.

The following cleaning operations must be performed every day.

• Insert the water pump into a bucket of clean water and pump the water

through the hose system.

• Wipe the rails and support arm with a grout sponge or a rag.

• Spray the water basin and the sliding table with clear water. Wipe any

dust residue away with a grout sponge.

Lubrication

Your power tool requires no additional lubrication.

Protecting the environment

Separate collection. This product must not be disposed of with

normal household waste.

Should you ﬁ nd one day that your D

EWALT product needs replacement, or

if it is of no further use to you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products and packaging allows

materials to be recycled and used again. Re-use of recycled

materials helps prevent environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection of electrical products

from the household, at municipal waste sites or by the retailer when you

purchase a new product.

EWALT provides a facility for the collection and recycling of DEWALT

products once they have reached the end of their working life. To take

advantage of this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by

contacting your local D

EWALT ofﬁ ce at the address indicated in this

manual. Alternatively, a list of authorised DEWALT repair agents and full

details of our after-sales service and contacts are available on the Internet

at: www.2helpU.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D24000 T 2 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info