Bedienungsanleitung DeWalt D25500K T-1 (Seite 23 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

544498

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Check for misalignment and seizure of moving

parts, breakage of parts and any other conditions

that may affect its operation. Have damaged

guards or other defective parts repaired or

replaced as instructed.

Do not use the tool if the switch is defective.

Have the switch replaced by an authorized

DEWALT repair agent.

20 Have your tool repaired by an authorized

DEWALT repair agent

This Power Tool is in accordance with the

relevant safety regulations. To avoid danger,

electric appliances must only be repaired by

qualified technicians.

Package contents

The package contains:

1 Rotary hammer

1 Side handle

1 Depth adjustment rod

1 Tube of bit lubricant

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your D25500/D25600 rotary hammer has been

designed for professional hammer drilling and light

chipping, chiselling and demolition applications.

1 On/off switch

2 Electronic speed and impact control dial

3 Service indicator LED (D25600)

4 Mode selector switch

5 Safety lock

6 Tool holder

7 Collar

8 Side handle

9 Side handle clamp wheel

10 Rear side handle position

11 Depth adjustment rod

12 Rear handle

Soft start feature

The soft start feature allows to build up speed slowly,

thus preventing the drill bit from walking off the

intended hole position when starting. The soft start

feature also reduces the immediate torque reaction

transmitted to the gearing and the operator if the

hammer is started with the drill bit in an existing hole.

Torque limiting clutch

The torque limiting clutch reduces the maximum

torque reaction transmitted to the operator in case

of jamming of a drill bit. This feature also prevents

the gearing and electric motor from stalling.

The torque limiting clutch has been factory-set and

cannot be adjusted.

Electronic speed and impact control (fig. B)

The electronic speed and impact control (2) offers

the following advantages:

- use of smaller accessories without risk of breakage

- minimised break-out when chiselling or drilling in

soft or brittle materials

- optimal tool control for precise chiselling

Service indicator LED (fig. B)

The red service indicator LED (3) lights up when the

carbon brushes are nearly worn out to indicate that

the tool needs servicing. After a further 8 hours of

use the motor will automatically be shut off.

The carbon brushes are not user-serviceable.

Take the tool to an authorized DEWALT repair agent.

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 50144; therefore no

earth wire is required.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorized

DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25500K T-1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info