Bedienungsanleitung DeWalt D25980K T 3 (Seite 26 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544658

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

• Always switch off the tool when work is finished

and before unplugging.

• Do not recondition accessories yourself. Chisel

reconditioning should be done by a qualified

specialist. Improperly reconditioned accessories

could cause injury. Only slightly worn

accessories can be resharpened by grinding.

Residual Risks

The following risks are inherent to the use of

demolition hammers:

– Injuries caused by touching the hot parts of the

tool.

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of squeezing fingers when changing the

accessory.

– Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

– Physical trauma due to inappropriate lifting and

carrying of heavy equipment.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG. 1)

The Date Code (q), which also includes the year of

manufacture, is printed into the housing.

Example:

2011 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Demolition hammer

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. On/off switch

b. Side handle(s)

c. Tool retainer

d. Tool holder

OPTIONAL ACCESSORIES (FIG. 3)

Various types of 28 mm hex. chisels are available as

an option.

e. Pointed chisel (DT6927)

f. Cold chisel (DT6929)

g. Scaling tool (DT6932)

h. Spade chisel (DT6928)

i. Asphalt cutter (DT6934)

j. Driver ground rod (DT6933)

k. Shank tamper (DT6935)

l. Plate tamper (DT6936)

Consult your dealer for further information on the

appropriate accessories.

INTENDED USE

D25980 demolition hammer has been designed for

professional heavy duty demolition, chipping and

chasing applications in concrete, brick, stone and

other masonry materials.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These demolition hammers are professional power

tools. DO NOT let children come into contact with

the tool. Supervision is required when inexperienced

operators use this tool.

Soft Start Feature

The soft start feature allows the impact rate to build

up more slowly, thus preventing the chisel or point

from “bouncing” around on the masonry when

starting up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25980K T 3 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info