Bedienungsanleitung DeWalt D25980K T 3 (Seite 27 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544658

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

Fully Vibration-dampened Handles

(ﬁ g. 1)

The dampers in the handles (b) absorb the vibrations

transmitted to the user. This improves user comfort

during the operation.

Active Vibration Control

The active vibration control neutralises rebound

vibration from the hammer mechanism. Lowering

hand and arm vibration, it allows more comfortable

use for longer periods of time and extends the life of

the unit.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen

between the primary and secondary

winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

DEWALT service organization.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

3–core extension cable suitable for the power input

of this tool (see Technical Data).The minimum

conductor size is 1.5 mm

; the maximum length

is 30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-ups

or when making repairs. Be sure the

trigger switch is in the OFF position. An

accidental start-up can cause injury.

Inserting And Removing 28 mm Hex

Accessories (ﬁ g. 4–6)

This machine uses chisels with a 28 mm hex. shank.

We recommend to use professional accessories

only.

WARNING: Since accessories other

than those offered by DEWALT have not

been tested with this product, the use of

such accessories may entail hazardous

situations. To reduce the risk of injury,

use only accessories recommended by

DEWALT.

Clean the chisel shank.

WARNING: Do not apply lubricant to

the machine.

TO FIT A CHISEL WITH GROOVE IN THE SHANK, PROCEED

AS FOLLOWS (FIG. 5)

1. Pull the tool retainer (c) to the unlock position.

2. Hold the chisel in front of the tool holder with

the groove (m) facing upwards.

3. Insert the chisel shank into the tool holder (d).

4. Push the retainer (c) backwards to lock the

accessory in position.

TO FIT A CHISEL WITH COLLAR ON THE SHANK, PROCEED

AS FOLLOWS (FIG. 6)

1. Pull the tool retainer (c) to the unlock position.

2. Insert the chisel shank into the tool holder (d).

3. Push the retainer (c) in line with the accessory

shank to lock the accessory in position.

4. Pull on the chisel to check if it is properly

locked. The hammering function requires

the chisel to be able to move axially several

centimetres when locked in the tool holder.

To remove a chisel pull back the retainer (c) and pull

the chisel out of the tool holder.

WARNING: Always wear gloves when

you change accessories. The exposed

metal parts on the tool and accessory

may become extremely hot during

operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25980K T 3 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info