Bedienungsanleitung DeWalt D27105 T 3 (Seite 25 von 26) (Englisch)

546215

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

• Loosen the screw (140) of the adjustment cam (141).

• Rotate the adjustment cam using a pair of needle nose pliers.

• Hold the adjustment cam with the pliers and tighten the screw.

• Replace the retainer plate and tighten the screws.

• Rotate the machine into mitre saw mode. Check the force that is

needed to mitre the saw. Repeat the above steps if the force needed is

too high.

Cleaning

Before use, carefully check the upper blade guard, movable lower blade

guard as well as the dust extraction tube to determine that it will operate

properly. Ensure that chips, dust or workpiece particle cannot lead to

blockage of one of the functions.

In case of workpiece fragments jammed between saw blade and guards

disconnect the machine from the power supply and follow the instructions

given in section Mounting the Saw Blade. Remove the jammed parts and

reassembling the saw blade.

WARNING: Blow dirt and dust out of the main housing with dry

air as often as dirt is seen collecting in and around the air vents.

Wear approved eye protection and approved dust mask when

performing this procedure.

WARNING: Never use solvents or other harsh chemicals for

cleaning the non-metallic parts of the tool. These chemicals

may weaken the materials used in these parts. Use a cloth

dampened only with water and mild soap. Never let any liquid

get inside the tool; never immerse any part of the tool into a

liquid.

WARNING:: To reduce the risk of injury, regularly clean the

table top.

WARNING: To reduce the risk of injury, regularly clean the

dust collection system.

Optional Accessories

WARNING: Since accessories, other than those offered by

DEWALT, have not been tested with this product, use of such

accessories with this tool could be hazardous. To reduce the

risk of injury, only DEWALT, recommended accessories should

be used with this product.

LASER WARNING:

LASER RADIATION: DO NOT STARE INTO BEAM

CLASS 2 PRODUCT

MAXIMUM OUTPUT POWER

P = < 1 mW;

peak

= 630 nm –680 nm

IEC 60825-1: 2007

Consult your dealer for further information on the appropriate accessories.

Protecting the Environment

Separate collection. This product must not be disposed of with

normal household waste.

Should you ﬁnd one day that your DEWALT product needs replacement, or

if it is of no further use to you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products and packaging allows

materials to be recycled and used again. Re-use of recycled

materials helps prevent environmental pollution and reduces the

demand for raw materials.

Local regulations may provide for separate collection of electrical products

from the household, at municipal waste sites or by the retailer when you

purchase a new product.

DEWALT provides a facility for the collection and recycling of DEWALT

products once they have reached the end of their working life. To take

advantage of this service please return your product to any authorised repair

agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by

contacting your local D

EWALT office at the address indicated in this manual.

Alternatively, a list of authorised DEWALT repair agents and full details

of our after-sales service and contacts are available on the Internet at:

www.2helpU.com.

GUARANTEE

DEWALT is confident of the quality of its products and offers an

outstanding guarantee for professional users of the product.

This guarantee statement is in addition to and in no way

prejudices your contractual rights as a professional user or

your statutory rights as a private non-professional user. The

guarantee is valid within the territories of the Member States of

the European Union and the European Free Trade Area.

• 30 DAY NO RISK

SATISFACTION GUARANTEE •

If you are not completely satisfied with the performance of your

DEWALT tool, simply return it within 30 days, complete with all

original components, as purchased, to the point of purchase,

for a full refund or exchange. The product must have been

subject to fair wear and tear and proof of purchase must be

produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your DEWALT tool,

in the 12 months following purchase, it will be undertaken

free of charge at an authorised DEWALT repair agent. Proof

of purchase must be produced. Includes labour. Excludes

accessories and spare parts unless failed under warranty.

• ONE YEAR FULL WARRANTY •

If your DEWALT product becomes defective due to faulty

materials or workmanship within 12 months from the date of

purchase, DEWALT guarantees to replace all defective parts

free of charge or – at our discretion – replace the unit free of

charge provided that:

• The product has not been misused;

• The product has been subject to fair wear and tear;

• Repairs have not been attempted by unauthorised

persons;

• Proof of purchase is produced;

• The product is returned complete with all original

components.

If you wish to make a claim, contact your seller or check the

location of your nearest authorised DEWALT repair agent in

the DEWALT catalogue or contact your DEWALT office at the

address indicated in this manual. A list of authorised DEWALT

repair agents and full details of our after-sales service is

available on the Internet at: www.2helpU.com.

DeWalt D27105 T 3 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info